Fix device model spelling errors and improve error handling in install_bl.py

Fix device model spelling errors and improve error handling in install_bl.py

install_bl.py

@@ -26,15 +26,16 @@ fn_remote = '/tmp/bootloader.bin'
 fn_local  = None
 
 if bl_name == 'breed':
-  if dn != 'R3G' and dn != 'R3P' and dn != 'RM2100' and dn != 'RA71' and dn != 'CR6006' and dn != 'CR6008' and dn != 'CR6009' and dn != 'TR609' and dn !='TR608':
+  supported_devices = ['R3G', 'R3P', 'RM2100', 'RA71', 'CR6606', 'CR6608', 'CR6609', 'TR609', 'TR608']
+  if dn not in supported_devices:
     die("Breed bootloader cannot be installed on this device!")
-  if dn in ['CR6006', 'CR6008', 'CR6009', 'TR609', 'TR608']:
+  if dn in ['CR6606', 'CR6608', 'CR6609', 'TR609', 'TR608']:
     fn_local = fn_dir + 'pb-boot-cr660x.img'
   else:
     fn_local = fn_dir + 'breed_r3g_eng.bin'
 
 if bl_name == 'uboot':
-  fn_local = fn_dir + 'uboot_{}.bin'.format(gw.device_name)
+  fn_local = fn_dir + 'uboot_{}.bin'.format(dn)
 
 if not fn_local:
   die('Incorrect bootloader name!')
@@ -54,6 +55,10 @@ if dev.bl.spi_rom:
   die("Not support SPI Flash ROM! (now supported only NAND)")
 
 addr = None
+name = None
+size = None
+
+# Find bootloader partition (typically at address 0, but skip large "ALL" partitions)
 for p, part in enumerate(dev.partlist):
   if part['addr'] == 0 and part['size'] > 0x00800000:  # 8MiB
     continue  # skip "ALL" part
@@ -62,12 +67,29 @@ for p, part in enumerate(dev.partlist):
     fname = ''.join(e for e in name if e.isalnum())
     addr = part['addr']
     size = part['size']
+    break  # Take the first valid partition found
 
 if addr is None:
   die("No matching partition found!")
 
-gw.upload(fn_local, fn_remote)
-print ('Writing data to partition "{}" (addr: {}) ...'.format(name, "0x%08X" % addr))
-gw.run_cmd('mtd write {bin} "{name}"'.format(bin=fn_remote, name=name))
+# Validate that we have a proper partition name before proceeding
+if not name:
+  die("Invalid partition name found!")
+
+print('Selected partition: "{}" at address 0x{:08X} (size: 0x{:08X})'.format(name, addr, size))
+
+# Upload bootloader file to device
+try:
+  gw.upload(fn_local, fn_remote)
+except Exception as e:
+  die('Failed to upload bootloader file: {}'.format(str(e)))
+
+print('Writing data to partition "{}" (addr: {}) ...'.format(name, "0x%08X" % addr))
+
+# Write bootloader to partition with error handling
+try:
+  gw.run_cmd('mtd write {bin} "{name}"'.format(bin=fn_remote, name=name))
+except Exception as e:
+  die('Failed to write bootloader to partition: {}'.format(str(e)))
 
 print('Ready! Bootloader "{}" installation is complete.'.format(bl_name))