RAND_MAX is not guaranteed to be a divisor of ULONG_MAX, so take the
necessary precautions to get unbiased random numbers. Although the
bias might be negligible, it's not advisable to rely on it.
This commit fixes a leak of mmap'ed ring buffer that was not
unmaped when a socket was closed. In addition, the leak could
break an inline channel on certain configurations.
Also slightly changed AFPCreateSocket():
1. If an interface is not up, it does not try to apply any
settings to a socket. This reduces a number of error messages
while an interface is down.
2. Interface is considered active if both IFF_UP and IFF_RUNNING
are present.
In offline mode, if the starting timestamp is 0 suricata will never
initialize cached_minute_start array. This cause the timestamp to be
ignored when needed (e.g., in fast.log).
This commit will force the initialization of this array.
According to PF_RING upstream the vlan header should never be stripped
from the packet PF_RING feeds to Suricata. But upstream also indicated
keeping the check would be a good "safety check".
So in addition to the check, add a warning that warns once (per thread
for implementation simplicity) if the vlan hdr does appear to be stripped
after all.
When Suricata was monitoring traffic with a single vlan layer, the stats
and output instead showed 2. This was caused by the raw packets PF_RING
feeds Suricata would hold the vlan header, but the code assumed that
the header was stripped and the vlan_id passed to Suricata through
PF_RING's extended_hdr.parsed_pkt.
This patch adds the following logic: Check vlan id from the parser packet
PF_RING prepared. PF_RING sets the vlan_id based on its own parsing or
based on the hardware offload. It gives no indication on where the vlan_id
came from, so we rely on the vlan_offset field. If it's 0, we assume the
PF_RING parser did not see the vlan header and got it from the hardware
offload. In this case we will use this information directly, as we won't
get a raw vlan header later. If PF_RING did set the offset, we do the
parsing in the Suricata decoder so that we have full control.
PF_RING *should* put back the vlan header in all cases, and also set the
vlan_offset field, but as a extra precaution keep the check described
above.
Bug #2355.
If the hash function returns an index greater than the array size of the
hash table, the index is not checked. Even if this is the responsibility
of the caller, add a safety check to avoid errors.
In some cases the rule reload could hang. The pending USR2 signals will
be recognized even with the <2 check. Also the SCLogWarning shouldn't be
used in the handler (see Warning about SCLog* API above in the code).
Check counter id before updating a counter. In case of a disabled
parser with the protocol detection enable, the id can be 0. In
debug mode this would lead to a BUG_ON.
If output log reopen fails, don't try to output the error. This would
lead to a deadlock as reopen was called from a SCLogMessage call. This
call already held the output lock.
Bug #2306.
Multiple NULL-pointer dereferences after ConfGet in PostConfLoadedSetup can cause suricata to terminate with segfaults. The ASAN-output:
ASAN:DEADLYSIGNAL =================================================================
5734ERROR: AddressSanitizer: SEGV on unknown address 0x000000000000 (pc 0x7f1a9a3967cc bp 0x7ffdff033ad0 sp 0x7ffdff033250 T0)
0 0x7f1a9a3967cb (/usr/lib/x86_64-linux-gnu/libasan.so.3+0x447cb)
1 0x55ba65f66f27 in PostConfLoadedSetup /root/suricata-1/src/suricata.c:2652
2 0x55ba65f6870e in main /root/suricata-1/src/suricata.c:2898
3 0x7f1a96aeb2b0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202b0)
4 0x55ba65af9039 in _start (/usr/local/bin/suricata+0xc8039)
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: SEGV (/usr/lib/x86_64-linux-gnu/libasan.so.3+0x447cb)
This commit fixes Bug #2370 by replacing ConfGet by ConfGetValue
There are multiple NULL-pointer dereferences after calling ConfGetBool in StreamTcpInitConfig. ConfGetBool calls ConfGet which doesn't check the vptr-argument. This is a sample ASAN-output:
1453ERROR: AddressSanitizer: SEGV on unknown address 0x000000000000 (pc 0x7f2969b83a28 bp 0x7ffdbf613a90 sp 0x7ffdbf613210 T0)
0 0x7f2969b83a27 in strcasecmp (/usr/lib/x86_64-linux-gnu/libasan.so.3+0x51a27)
1 0x564185accefd in ConfValIsTrue /root/suricata-1/src/conf.c:559
2 0x564185accb4f in ConfGetBool /root/suricata-1/src/conf.c:512
3 0x564185dcbe05 in StreamTcpInitConfig /root/suricata-1/src/stream-tcp.c:381
4 0x564185e21a88 in PreRunInit /root/suricata-1/src/suricata.c:2264
5 0x564185e24d2c in PostConfLoadedSetup /root/suricata-1/src/suricata.c:2763
6 0x564185e2570e in main /root/suricata-1/src/suricata.c:2898
7 0x7f29662cb2b0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202b0)
8 0x5641859b6039 in _start (/usr/local/bin/suricata+0xc8039)
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: SEGV (/usr/lib/x86_64-linux-gnu/libasan.so.3+0x51a27) in strcasecmp
1453ABORTING
This commit replaces ConfGet by ConfGetValue in ConfGetBool. This does not only fix Bug #2368 but might also fix others too.
Multiple NULL-pointer dereferences after ConfGet in HostInitConfig can cause suricata to terminate with segfaults. The ASAN-output:
==29747==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000000 (pc 0x7ff937904646 bp
0 0x7ff937904645 in strlen (/lib/x86_64-linux-gnu/libc.so.6+0x80645)
1 0x7ff93b146eec (/usr/lib/x86_64-linux-gnu/libasan.so.3+0x3beec)
2 0x5618387c86a3 in HostInitConfig /root/suricata-1/src/host.c:174
3 0x56183893eccb in PostConfLoadedSetup /root/suricata-1/src/suricata.c:2752
4 0x56183893f70e in main /root/suricata-1/src/suricata.c:2898
5 0x7ff9378a42b0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202b0)
6 0x5618384d0039 in _start (/usr/local/bin/suricata+0xc8039)
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: SEGV (/lib/x86_64-linux-gnu/libc.so.6+0x80645) in strlen
This commit fixes Bug #2367
There are several NULL-pointer derefs in StreamTCPInitConfig. All of them happen because ConfGet returns 1 even if the value is NULL(due to misconfiguration for example).
This commit introduces a new function "ConfGetValue". It adds return values for NULL-pointer to ConfGet and could be used as a replacement for ConfGet.
Note: Simply modify ConfGet might not be a good idea, because there are some places where ConfGet should return 1 even if "value" is NULL. For example if ConfGet should get a Config-Leave in the yaml-hierarchy.
Bug: 2354
This commit fixes multiple NULL-pointer dereferences in FlowInitConfig after reading in config-values(flow.hash-size, flow.prealloc and flow.memcap) for flow. Here is a sample ASAN-output:
=================================================================
ERROR: AddressSanitizer: SEGV on unknown address 0x000000000000 (pc 0x7fea73456646 bp 0x7fffd70e1ba0 sp 0x7fffd70e1328 T0)
0 0x7fea73456645 in strlen (/lib/x86_64-linux-gnu/libc.so.6+0x80645)
1 0x7fea76c98eec (/usr/lib/x86_64-linux-gnu/libasan.so.3+0x3beec)
2 0x5643efb4c205 in FlowInitConfig /root/suricata-1/src/flow.c:455
3 0x5643efcd1751 in PreRunInit /root/suricata-1/src/suricata.c:2247
4 0x5643efcd49f4 in PostConfLoadedSetup /root/suricata-1/src/suricata.c:2748
5 0x5643efcd5402 in main /root/suricata-1/src/suricata.c:2884
6 0x7fea733f62b0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202b0)
7 0x5643ef8761a9 in _start (/usr/local/bin/suricata+0xc51a9)
Ticketno: Bug #2349
The "sig_file" argument of DetectLoadCompleteSigPath() is not checked for NULL-values. If this argument is NULL a SEGV occurs because of a dereferenced NULL-pointer in strlen in PathIsAbsolute. This commit fixes bug #2347. Here is the ASAN-output:
==17170==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000000 (pc 0x7fd1afa00646 bp 0x7ffe8398e6d0 sp 0x7ffe8398de58 T0)
0 0x7fd1afa00645 in strlen (/lib/x86_64-linux-gnu/libc.so.6+0x80645)
1 0x7fd1b3242eec (/usr/lib/x86_64-linux-gnu/libasan.so.3+0x3beec)
2 0x5561c8cddf7f in PathIsAbsolute /root/suricata-1/src/util-path.c:40
3 0x5561c8cddfea in PathIsRelative /root/suricata-1/src/util-path.c:65
4 0x5561c89275e4 in DetectLoadCompleteSigPath /root/suricata-1/src/detect.c:264
5 0x5561c8929e75 in SigLoadSignatures /root/suricata-1/src/detect.c:486
6 0x5561c8c0f2b3 in LoadSignatures /root/suricata-1/src/suricata.c:2419
7 0x5561c8c1051d in PostConfLoadedDetectSetup /root/suricata-1/src/suricata.c:2550
8 0x5561c8c12424 in main /root/suricata-1/src/suricata.c:2887
9 0x7fd1af9a02b0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202b0)
10 0x5561c87b31a9 in _start (/usr/local/bin/suricata+0xc51a9)
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: SEGV (/lib/x86_64-linux-gnu/libc.so.6+0x80645) in strlen
The value for the configuration-option "unix-command.enabled" is not properly checked in ConfUnixSocketIsEnable. This causes a NULL-pointer dereference in strcmp. This commit fixes bug #2346. The ASAN-output looks like:
ERROR: AddressSanitizer: SEGV on unknown address 0x000000000000 (pc 0x7f03b69737cc bp 0x7ffcef322c10 sp 0x7ffcef322390 T0)
0 0x7f03b69737cb (/usr/lib/x86_64-linux-gnu/libasan.so.3+0x447cb)
1 0x5617a76d3f55 in ConfUnixSocketIsEnable /root/suricata-1/src/util-conf.c:104
2 0x5617a741b6e7 in DetectEngineMultiTenantSetup /root/suricata-1/src/detect-engine.c:2447
3 0x5617a769e0c3 in PostConfLoadedDetectSetup /root/suricata-1/src/suricata.c:2527
4 0x5617a76a0424 in main /root/suricata-1/src/suricata.c:2887
5 0x7f03b30c82b0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202b0)
6 0x5617a72411a9 in _start (/usr/local/bin/suricata+0xc51a9)
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: SEGV (/usr/lib/x86_64-linux-gnu/libasan.so.3+0x447cb
There is a memory-leak in DetectAddressTestConfVars. If the programm takes the "goto error"-path, the pointers gh and ghn will not be freed. This commit fixes bug #2345. Here is the ASAN-output:
=================================================================
ERROR: LeakSanitizer: detected memory leaks
Direct leak of 24 byte(s) in 1 object(s) allocated from:
0 0x7f4347cb1d28 in malloc (/usr/lib/x86_64-linux-gnu/libasan.so.3+0xc1d28)
1 0x55fe1fc8dcfc in DetectAddressHeadInit /root/suricata-1/src/detect-engine-address.c:1534
2 0x55fe1fc8c50a in DetectAddressTestConfVars /root/suricata-1/src/detect-engine-address.c:1306
3 0x55fe1ff356bd in PostConfLoadedSetup /root/suricata-1/src/suricata.c:2696
4 0x55fe1ff365eb in main /root/suricata-1/src/suricata.c:2884
5 0x7f43443892b0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202b0)
Direct leak of 24 byte(s) in 1 object(s) allocated from:
0 0x7f4347cb1d28 in malloc (/usr/lib/x86_64-linux-gnu/libasan.so.3+0xc1d28)
1 0x55fe1fc8dcfc in DetectAddressHeadInit /root/suricata-1/src/detect-engine-address.c:1534
2 0x55fe1fc8c524 in DetectAddressTestConfVars /root/suricata-1/src/detect-engine-address.c:1310
3 0x55fe1ff356bd in PostConfLoadedSetup /root/suricata-1/src/suricata.c:2696
4 0x55fe1ff365eb in main /root/suricata-1/src/suricata.c:2884
5 0x7f43443892b0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202b0)
SUMMARY: AddressSanitizer: 48 byte(s) leaked in 2 allocation(s).
https://redmine.openinfosecfoundation.org/issues/2215
Fixes issue with events being dropped since socket was non-blocking for
offline run modes.
Add a method for determining offline from run mode. Make sure SCInstance
offline is set correctly. Use current run mode to set socket flags.
SCLogMapLogLevelToSyslogLevel(): treat SC_LOG_PERF messages as LOG_DEBUG
Previously, when logging to syslog, perf events had a default EMERG priority,
which could be a bit confusing.
Victor Julien
Martin Natano
Alexander Gozman
Maurizio Abba
Nick Price
Eric Leblond
Jason Ish
Pierre Chifflier
Andreas Herz
Wolfgang Hotwagner
Danny Browning