This patch adds a new feature to AF_PACKET capture mode. It is now
possible to use AF_PACKET in IPS and TAP mode: all traffic received
on a interface will be forwarded (at the Ethernet level) to an other
interface. To do so, Suricata create a raw socket and sends the receive
packets to a interface designed in the configuration file.
This patch adds two variables to the configuration of af-packet
interface:
copy-mode: ips or tap
copy-iface: eth1 #the interface where packet are copied
If copy-mode is set to ips then the packet wth action DROP are not
copied to the destination interface. If copy-mode is set to tap,
all packets are copied to the destination interface.
Any other value of copy-mode results in the feature to be unused.
There is no default interface for copy-iface and the variable has
to be set for the ids or tap mode to work.
For now, this feature depends of the release data system. This
implies you need to activate the ring mode and zero copy. Basically
use-mmap has to be set to yes.
This patch adds a peering of AF_PACKET sockets from the thread on
one interface to the threads on another interface. Peering is
necessary as if we use an other socket the capture socket receives
all emitted packets. This is made using a new AFPPeer structure to
avoid direct interaction between AFPTreadVars.
There is currently a bug in Linux kernel (prior to 3.6) and it is
not possible to use multiple threads.
You need to setup two interfaces with equality on the threads
variable. copy-mode variable must be set on the two interfaces
and use-mmap must be set to activated.
A valid configuration for an IPS using eth0 and vboxnet1 interfaces
will look like:
af-packet:
- interface: eth0
threads: 1
defrag: yes
cluster-type: cluster_flow
cluster-id: 98
copy-mode: ips
copy-iface: vboxnet1
buffer-size: 64535
use-mmap: yes
- interface: vboxnet1
threads: 1
cluster-id: 97
defrag: yes
cluster-type: cluster_flow
copy-mode: ips
copy-iface: eth0
buffer-size: 64535
use-mmap: yes
The mmaped mode was using a too small ring buffer size which was
not able to handle burst of packets coming from the network. This
may explain the important packet loss rate observed by Edward
Fjellskål.
This patch increases the default value and adds a ring-size
variable which can be used to manually tune the value.
This patch modifies the init of Detect threads. They are now started
with a dummy function and their initialisation is done after the
signatures are loaded. Just after this, the dummy function is switched
to normal one.
In IPS mode, this permit to route packets without waiting for the
signature to start and should fix#488.
Offline mode such as pcap file don't use this mode to be sure to
analyse all packets in the file.
The patch introduces a "delayed-detect" configuration variable
under detect-engine. It can be used to activate the feature
(set to "yes" to have signature loaded after capture is started).
This patch adds a TLS store option to save certificate in PEM format.
Each time the store action is met, a file and a metafile are created.
Reworked-by: Eric Leblond <eric@regit.org>
Creation of the log-tlslog file in order to log tls message.
Need to add some information into suricata.yaml to work.
- tls-log:
enabled: yes # Log TLS connections.
filename: tls.log # File to store TLS logs.
On linux >= 3.6, you can use the fail-open option on a NFQ queue
to have the kernel accept the packet if userspace is not able to keep
pace.
Please note that the kernel will not trigger an error if the feature is activated
in userspace libraries but not available in kernel.
This patch implements the option for suricata by adding a nfq.fail-open
configuration variable which is desactivated by default.
This patch adds support for BPF in AF_PACKET running
mode. The command line syntax is the same as the one
used of PF_RING.
The method is the same too: The pcap_compile__nopcap()
function is used to build the BPF filter. It is then
injected into the kernel with a setsockopt() call. If
the adding of the BPF fail, suricata exit.
Add profiling per lock location in the code. Accounts how often a
lock is requested, how often it was contended, the max number of
ticks spent waiting for it, avg number of ticks waiting for it and
the total ticks for that location.
Added a new configure flag --enable-profiling-locks to enable this
feature.
This patch adds mmap support for af-packet. Suricata now makes
use of the ring buffer feature of AF_PACKET if 'use-mmap' variable
is set to yes on an interface.
This patch adds support for customisation of suricata.yaml and
automatic download of emerging threat GPL rules. By running
'make install-full' after 'make install', files necessary to run
suricata are copied in the configuration directory and the latest
ruleset is downloaded and installed. Suricata can then be run
without files edition.
This patch has a special treatment for the windows build which
requires some different paths.
suricata.yaml is also updated to load all rules files provided by
emergingthreat ruleset.
Eric Leblond
pi-rho
Jean-Paul Roliers
Ignacio Sanchez
Victor Julien
Anoop Saldanha
Nikolay Denev