Convert regular 'stats.log' output to this new API.
In addition to the current stats value, also give the last value. This
makes it easy to display the difference.
The SCStreamingBuffer call now also returns two booleans:
data, data_open, data_close = SCStreamingBuffer()
The first indicates this is the first data of this type for this
TCP session or HTTP transaction.
The second indicates this is the last data.
Ticket #1317.
sfd->target.value was always being set, even if the targettype was
not FLOWINT_TARGET_VAL. This would cause the tvar to be overwritten
with garbage data.
Add the modbus.function and subfunction) keywords for public function match in rules (Modbus layer).
Matching based on code function, and if necessary, sub-function code
or based on category (assigned, unassigned, public, user or reserved)
and negation is permitted.
Add the modbus.access keyword for read/write Modbus function match in rules (Modbus layer).
Matching based on access type (read or write),
and/or function type (discretes, coils, input or holding)
and, if necessary, read or write address access,
and, if necessary, value to write.
For address and value matching, "<", ">" and "<>" is permitted.
Based on TLS source code and file size source code (address and value matching).
Signed-off-by: David DIALLO <diallo@et.esia.fr>
Decode Modbus request and response messages, and extracts
MODBUS Application Protocol header and the code function.
In case of read/write function, extracts message contents
(read/write address, quantity, count, data to write).
Links request and response messages in a transaction according to
Transaction Identifier (transaction management based on DNS source code).
MODBUS Messaging on TCP/IP Implementation Guide V1.0b
(http://www.modbus.org/docs/Modbus_Messaging_Implementation_Guide_V1_0b.pdf)
MODBUS Application Protocol Specification V1.1b3
(http://www.modbus.org/docs/Modbus_Application_Protocol_V1_1b3.pdf)
Based on DNS source code.
Signed-off-by: David DIALLO <diallo@et.esia.fr>
A tx is considered complete after the data command completed. However,
this would lead to RSET and QUIT commands setting up a new tx.
This patch simply adds a check that refuses to setup a new tx when these
commands are encountered after the data portion is complete.
SigMatch would be added to list, then the alproto check failed, leading
to freeing of sm. But as it was still in the list, the list now contained
a dangling pointer.
When multiple email addresses were in the 'to' field, sometimes
they would be logged as "\r\n \"Name\" <email>".
The \r\n was added by GetFullValue in the mime decoder, for unknown
reasons. Disabling this seems to have no drawbacks.
Turn all buffers into uint8_t (from char) and no longer use the
string functions like strncpy/strncasecmp on them.
Store url and field names as lowercase, and also search/compare
them as lowercase. This allows us to use SCMemcmp.
The global variable suricata_ctl_flags needs to volatile, otherwise the
compiler might not cause the variable to be read every time because it
doesn't know other threads might write the variable.
This was causing Suricata to not exit under some conditions.
For these 2 cases:
1. Missing SYN:
-> syn <= missing
<- syn/ack
-> ack
-> data
2. Missing SYN and 3whs ACK:
-> syn <= missing
<- syn/ack
-> ack <= missing
-> data
Fix session pickup. The next_win settings weren't correctly set, so that
packets were rejected.
Bug 1190.
If 3whs SYN/ACK and ACK are missing we can still pick up the session if
in async-oneside mode.
-> syn
<- syn/ack <= missing
-> ack <= missing
-> data
Bug 1190.
The entire body of these functions are protected by ifdef PROFILING.
If the functions are inlined, then this check removes the need for the
function entirely.
Previously, the empty function was still called, even when not built
for profiling. The functions showed as being 0.25% of total CPU time
without being built for profiling.
If vlan is disabled the cluster_flow mode will still take VLAN tags
into account due to using pf_ring's 6-tuple mode.
So this forces to use pf_ring's 5-tuple mode.
Bug #1292
Implements new API to expand the IP reputation
to netblocks with CIDR notation
A new object 'srepCIDRTree' is kept in the DetectionEngineCtx,
which contains two tree (one for ipv4 and one for ipv6)
where the reputation values are stored.
ACK packets completing a valid FIN shutdown could be flagged as
'bad window update' if they would shrink the window.
This patch detects this case before doing the bad window update
check.
If the 3whs ACK and some data after this is lost, we would get stuck
in the 'SYN_RECV' state, where from there each packet might be
considered invalid.
This patch improves the handling of this case.
The keyword would not allow matching on "OpenSSH_5.5p1 Debian-6+squeeze5"
as the + and space characters were not allowed.
This patch adds support for them.
Stream pseudo packets are taken from the packet pool, which can be empty.
In this case a pseudo packet will not be created and processed.
This patch adds a counter "tcp.pseudo_failed" to track this.
doesn't need the gpu results and to release the packet for the next run.
Previously the inspection engine wouldn't inform the cuda module, if it
didn't need the results. As a consequence, when the packet is next taken
for re-use, and if the packet is still being processed by the cuda module,
the engine would wait till the cuda module frees the packet.
This commits updates this functionality to inform the cuda module to
release the packet for the afore-mentioned case.
Add option (disabled by default) to honor pass rules. This means that
when a pass rule matches in a flow, it's packets are no longer stored
by the pcap-log module.
SigMatchGetLastSMFromLists() is finding the sm with the largest
index among all of the values returned from SigMatchGetLastSM() on
the set of (list and type) tuples passed as arguments.
The function was creating an array of the types, then creating an array
of the results of SigMatchGetLastSM(), sorting that list completely, then
only returning the first values from the list.
The new code, gets one set of arguments from the variable arguments, calls
SigMatchGetLastSM() and if the returned sm has a larger index, keeps that
as the last sm.
Allow a script to set the 'stream' buffer type. This will add the
script to the PMATCH list.
Example script:
alert tcp any any -> any any (content:"html"; lua:stream.lua; sid:1;)
function init (args)
local needs = {}
needs["stream"] = tostring(true)
return needs
end
-- return match via table
function match(args)
local result = {}
b = tostring(args["stream"])
o = tostring(args["offset"])
bo = string.sub(b, o);
print (bo)
return result
end
return 0
To prevent accidental writes into the orignal packet buffer, use
const pointers for the extension header pointers used by IPv6. This
will cause compiler warnings in case of writes.
A logic error in the IPv6 Routing header parsing caused accidental
updating of the original packet buffer. The calculated extension
header lenght was set to the length field of the routing header,
causing it to be wrong.
This has 2 consequences:
1. defrag failure. As the now modified payload was used in defrag,
the decoding of the reassembled packet now contained a broken length
field for the routing header. This would lead to decoding failure.
The potential here is evasion, although it would trigger:
[1:2200014:1] SURICATA IPv6 truncated extension header
2. in IPS mode, especially the AF_PACKET mode, the modified and now
broken packet would be transmitted on the wire. It's likely that
end hosts and/or routers would reject this packet.
NFQ based IPS mode would be less affected, as it 'verdicts' based on
the packet handle. In case of replacing the packet (replace keyword
or stream normalization) it could broadcast the bad packet.
Additionally, the RH Type 0 address parsing was also broken. It too
would modify the original packet. As the result of this code was not
used anywhere else in the engine, this code is now disabled.
Reported-By: Rafael Schaefer <rschaefer@ernw.de>
AF_PACKET is not setting the engine mode to IPS when some
interfaces are peered and use IPS mode. This is due to the
fact, it is possible to peer 2 interfaces and run an IPS on
them and have a third one that is running in normal IDS mode.
In fact this choice is the bad one as unwanted side effect is
that there is no drop log and that stream inline is not used.
To fix that, this patch puts suricata in IPS mode as soon as
there is two interfaces in IPS mode. And it displays a error
message to warn user that the accuracy of detection on IDS only
interfaces will be low.
When using AMATCH, continue detection would fail if the tx part
had already run. This lead to start detection rerunning, causing
multiple alerts for the same issue.
As there is no inspection engine for request_line, the sigmatch was
added to the AMATCH list. However, no AppLayerMatch function for
lua scripts was defined.
This patch defines a AppLayerMatch function.
Bug #1273.
I found three somewhat serious IPv6 address bugs within the Suricata 2.0.x source code. Two are in the source module "detect-engine-address.c", and the third is in "util-radix-tree.c".
The first bug occurs within the function DetectAddressParse2(). When parsing an address string and a negated block is encountered (such as when parsing !$HOME_NET, for example), any corresponding IPv6 addresses were not getting added to the Group Heads in the DetectAddressList. Only IPv4 addresses were being added.
I discovered another bug related to IPv6 address ranges in the Signature Match Address Array comparison code for IPv6 addresses. The function DetectAddressMatchIPv6() walks a signature's source or destination match address list comparing each to the current packet's corresponding address value. The match address list consists of value pairs representing a lower and upper IP address range. If the packet's address is within that range (including equal to either the lower or upper bound), then a signature match flag is returned.
The original test of each signature match address to the packet was performed using a set of four compounded AND comparisons looking at each of the four 32-bit blocks that comprise an IPv6 address. The problem with the old comparison is that if ANY of the four 32-bit blocks failed the test, then a "no-match" was returned. This is incorrect. If one or more of the more significant 32-bit blocks met the condition, then it is a match no matter if some of the less significant 32-bit blocks did not meet the condition. Consider this example where Packet represents the packet address being checked, and Target represents the upper bound of a match address pair. We are testing if Packet is less than Target.
Packet -- 2001:0470 : 1f07:00e2 : 1988:01f1 : d468:27ab
Target -- 2001:0470 : 1f07:00e2 : a48c:2e52 : d121:101e
In this example the Packet's address is less than the target and it should give a match. However, the old code would compare each 32-bit block (shown spaced out above for clarity) and logically AND the result with the next least significant block comparison. If any of the four blocks failed the comparison, that kicked out the whole address. The flaw is illustrated above. The first two blocks are 2001:0470 and 1f07:00e2 and yield TRUE; the next less significant block is 1988:01f1 and a48c:2e52, and also yields TRUE (that is, Packet is less than Target); but the last block compare is FALSE (d468:27ab is not less than d121:101e). That last block is the least significant block, though, so its FALSE determination should not invalidate a TRUE from any of the more significant blocks. However, in the previous code using the compound logical AND block, that last least significant block would invalidate the tests done with the more significant blocks.
The other bug I found for IPv6 occurs when trying to parse and insert an IPv6 address into a Radix Tree using the function SCRadixAddKeyIPV6String(). The test for min and max values for an IPv6 CIDR mask incorrectly tests the upper limit as 32 when it should be 128 for an IPv6 address. I think this perhaps is an old copy-paste error if the IPv6 version of this function was initially copied from the corresponding IPv4 version directly above it in the code. Without this patch, the function will return null when you attempt to add an IPv6 network whose CIDR mask is larger than 32 (for example, the popular /64 mask will cause the function to return the NULL error condition).
(amended by Victor Julien)
When using the inspection engines, track the current tx_id in the
thread storage the detect thread uses. As 0 is a valid tx_id, add
a simple bool that indicates if the tx_id field is set.
Allow use of the Flow Logging API through Lua scripts.
Minimal script:
function init (args)
local needs = {}
needs["type"] = "flow"
return needs
end
function setup (args)
end
function log(args)
startts = SCFlowTimeString()
ipver, srcip, dstip, proto, sp, dp = SCFlowTuple()
print ("Flow IPv" .. ipver .. " src " .. srcip .. " dst " .. dstip ..
" proto " .. proto .. " sp " .. sp .. " dp " .. dp)
end
function deinit (args)
end
Add SCStreamingBuffer lua function to retrieve the data passed
to the script per streaming API invocation.
Example:
function log(args)
data = SCStreamingBuffer()
hex_dump(data)
end
Make normalized body data available to the script through
HttpGetRequestBody and HttpGetResponseBody.
There no guarantees that all of the body will be availble.
Example:
function log(args)
a, o, e = HttpGetResponseBody();
--print("offset " .. o .. " end " .. e)
for n, v in ipairs(a) do
print(v)
end
end
Get the host from libhtp's tx->request_hostname, which can either be
the host portion of the url or the host portion of the Host header.
Example:
http_host = HttpGetRequestHost()
if http_host == nil then
http_host = "<hostname unknown>"
end
SCFlowAppLayerProto: get alproto as string from the flow. If alproto
is not (yet) known, it returns "unknown".
function log(args)
alproto = SCFlowAppLayerProto()
if alproto ~= nil then
print (alproto)
end
end
A new callback to give access to thread id, name and group name:
SCThreadInfo. It gives: tid (integer), tname (string), tgroup (string)
function log(args)
tid, tname, tgroup = SCThreadInfo()
SCFlowTimeString: returns string form of start time of a flow
Example:
function log(args)
startts = SCFlowTimeString()
ts = SCPacketTimeString()
if ts == startts then
print("new flow")
end
Add SCPacketTimeString to get the packets time string in the format:
11/24/2009-18:57:25.179869
Example use:
function log(args)
ts = SCPacketTimeString()
SCRuleIds(): returns sid, rev, gid:
function log(args)
sid, rev, gid = SCRuleIds()
SCRuleMsg(): returns msg
function log(args)
msg = SCRuleMsg()
SCRuleClass(): returns class msg and prio:
function log(args)
class, prio = SCRuleClass()
if class == nil then
class = "unknown"
end
Add flow store and retrieval wrappers for accessing the flow through
Lua's lightuserdata method.
The flow functions store/retrieve a lock hint as well.
If the script needing a packet doesn't specify a filter, it will
be run against all packets. This patch adds the support for this
mode. It is a packet logger with a condition function that always
returns true.
Victor Julien
Giuseppe Longo
Ken Steele
DIALLO David
Christophe M
Tom DeCanio
Eric Leblond
David Abarbanel
Jason Ish
Anoop Saldanha
Mats Klepsland
bmeeks8