You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

2612 lines
144 KiB
XML

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

<?xml version="1.0" ?><!DOCTYPE TS><TS language="bg" version="2.1">
<context>
<name>BootInfoWidget</name>
<message>
<location filename="../src/modules/partition/gui/BootInfoWidget.cpp" line="69"/>
<source>The &lt;strong&gt;boot environment&lt;/strong&gt; of this system.&lt;br&gt;&lt;br&gt;Older x86 systems only support &lt;strong&gt;BIOS&lt;/strong&gt;.&lt;br&gt;Modern systems usually use &lt;strong&gt;EFI&lt;/strong&gt;, but may also show up as BIOS if started in compatibility mode.</source>
<translation>&lt;strong&gt;Среда за начално зареждане&lt;/strong&gt; на тази система.&lt;br&gt;&lt;br&gt;Старите x86 системи поддържат само &lt;strong&gt;BIOS&lt;/strong&gt;.&lt;br&gt;Модерните системи обикновено използват &lt;strong&gt;EFI&lt;/strong&gt;, но може също така да използват BIOS, ако са стартирани в режим на съвместимост.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/BootInfoWidget.cpp" line="79"/>
<source>This system was started with an &lt;strong&gt;EFI&lt;/strong&gt; boot environment.&lt;br&gt;&lt;br&gt;To configure startup from an EFI environment, this installer must deploy a boot loader application, like &lt;strong&gt;GRUB&lt;/strong&gt; or &lt;strong&gt;systemd-boot&lt;/strong&gt; on an &lt;strong&gt;EFI System Partition&lt;/strong&gt;. This is automatic, unless you choose manual partitioning, in which case you must choose it or create it on your own.</source>
<translation>Тази система беше стартирана с &lt;strong&gt;EFI&lt;/strong&gt; среда за начално зареждане.&lt;br&gt;&lt;br&gt;За да се настрои стартирането от EFI, инсталаторът трябва да разположи програма за начално зареждане като &lt;strong&gt;GRUB&lt;/strong&gt; или &lt;strong&gt;systemd-boot&lt;/strong&gt; на &lt;strong&gt;EFI Системен Дял&lt;/strong&gt;. Това се прави автоматично, освен ако не се избере ръчно поделяне, в такъв случай вие трябва да свършите тази работа.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/BootInfoWidget.cpp" line="91"/>
<source>This system was started with a &lt;strong&gt;BIOS&lt;/strong&gt; boot environment.&lt;br&gt;&lt;br&gt;To configure startup from a BIOS environment, this installer must install a boot loader, like &lt;strong&gt;GRUB&lt;/strong&gt;, either at the beginning of a partition or on the &lt;strong&gt;Master Boot Record&lt;/strong&gt; near the beginning of the partition table (preferred). This is automatic, unless you choose manual partitioning, in which case you must set it up on your own.</source>
<translation>Тази система беше стартирана с &lt;strong&gt;BIOS&lt;/strong&gt; среда за начално зареждане.&lt;br&gt;&lt;br&gt;За да се настрои стартирането от BIOS, инсталаторът трябва да разположи програма за начално зареждане като &lt;strong&gt;GRUB&lt;/strong&gt; в началото на дяла или на &lt;strong&gt;Сектора за Начално Зареждане&lt;/strong&gt; близо до началото на таблицата на дяловете (предпочитано). Това се прави автоматично, освен ако не се избере ръчно поделяне, в такъв случай вие трябва да свършите тази работа.</translation>
</message>
</context>
<context>
<name>BootLoaderModel</name>
<message>
<location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="59"/>
<source>Master Boot Record of %1</source>
<translation>Сектор за начално зареждане на %1</translation>
</message>
<message>
<location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="76"/>
<source>Boot Partition</source>
<translation>Дял за начално зареждане</translation>
</message>
<message>
<location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="81"/>
<source>System Partition</source>
<translation>Системен дял</translation>
</message>
<message>
<location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="111"/>
<source>Do not install a boot loader</source>
<translation>Не инсталирай програма за начално зареждане</translation>
</message>
<message>
<location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="125"/>
<source>%1 (%2)</source>
<translation>%1 (%2)</translation>
</message>
</context>
<context>
<name>Calamares::BlankViewStep</name>
<message>
<location filename="../src/libcalamaresui/viewpages/BlankViewStep.cpp" line="69"/>
<source>Blank Page</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>Calamares::DebugWindow</name>
<message>
<location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="14"/>
<source>Form</source>
<translation>Форма</translation>
</message>
<message>
<location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="24"/>
<source>GlobalStorage</source>
<translation>Глобално съхранение</translation>
</message>
<message>
<location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="34"/>
<source>JobQueue</source>
<translation>Опашка от задачи</translation>
</message>
<message>
<location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="44"/>
<source>Modules</source>
<translation>Модули</translation>
</message>
<message>
<location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="57"/>
<source>Type:</source>
<translation>Вид:</translation>
</message>
<message>
<location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="64"/>
<location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="78"/>
<source>none</source>
<translation>няма</translation>
</message>
<message>
<location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="71"/>
<source>Interface:</source>
<translation>Интерфейс:</translation>
</message>
<message>
<location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="93"/>
<source>Tools</source>
<translation>Инструменти</translation>
</message>
<message>
<location filename="../src/libcalamaresui/utils/DebugWindow.cpp" line="182"/>
<source>Debug information</source>
<translation>Информация за отстраняване на грешки</translation>
</message>
</context>
<context>
<name>Calamares::ExecutionViewStep</name>
<message>
<location filename="../src/libcalamaresui/ExecutionViewStep.cpp" line="79"/>
<source>Install</source>
<translation>Инсталирай</translation>
</message>
</context>
<context>
<name>Calamares::JobThread</name>
<message>
<location filename="../src/libcalamares/JobQueue.cpp" line="101"/>
<source>Done</source>
<translation>Готово</translation>
</message>
</context>
<context>
<name>Calamares::ProcessJob</name>
<message>
<location filename="../src/libcalamares/ProcessJob.cpp" line="52"/>
<source>Run command %1 %2</source>
<translation>Изпълни команда %1 %2</translation>
</message>
<message>
<location filename="../src/libcalamares/ProcessJob.cpp" line="61"/>
<source>Running command %1 %2</source>
<translation>Изпълняване на команда %1 %2</translation>
</message>
</context>
<context>
<name>Calamares::PythonJob</name>
<message>
<location filename="../src/libcalamares/PythonJob.cpp" line="273"/>
<source>Running %1 operation.</source>
<translation>Изпълнение на %1 операция.</translation>
</message>
<message>
<location filename="../src/libcalamares/PythonJob.cpp" line="288"/>
<source>Bad working directory path</source>
<translation>Невалиден път на работната директория</translation>
</message>
<message>
<location filename="../src/libcalamares/PythonJob.cpp" line="289"/>
<source>Working directory %1 for python job %2 is not readable.</source>
<translation>Работна директория %1 за python задача %2 не се чете.</translation>
</message>
<message>
<location filename="../src/libcalamares/PythonJob.cpp" line="299"/>
<source>Bad main script file</source>
<translation>Невалиден файл на главен скрипт</translation>
</message>
<message>
<location filename="../src/libcalamares/PythonJob.cpp" line="300"/>
<source>Main script file %1 for python job %2 is not readable.</source>
<translation>Файлът на главен скрипт %1 за python задача %2 не се чете.</translation>
</message>
<message>
<location filename="../src/libcalamares/PythonJob.cpp" line="376"/>
<source>Boost.Python error in job &quot;%1&quot;.</source>
<translation>Boost.Python грешка в задача &quot;%1&quot;.</translation>
</message>
</context>
<context>
<name>Calamares::ViewManager</name>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="74"/>
<source>&amp;Back</source>
<translation>&amp;Назад</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="75"/>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="279"/>
<source>&amp;Next</source>
<translation>&amp;Напред</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="76"/>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="288"/>
<source>&amp;Cancel</source>
<translation>&amp;Отказ</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="77"/>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="289"/>
<source>Cancel installation without changing the system.</source>
<translation>Отказ от инсталацията без промяна на системата.</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="179"/>
<source>Calamares Initialization Failed</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="180"/>
<source>%1 can not be installed. Calamares was unable to load all of the configured modules. This is a problem with the way Calamares is being used by the distribution.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="185"/>
<source>&lt;br/&gt;The following modules could not be loaded:</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="277"/>
<source>&amp;Install</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="325"/>
<source>Cancel installation?</source>
<translation>Отмяна на инсталацията?</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="326"/>
<source>Do you really want to cancel the current install process?
The installer will quit and all changes will be lost.</source>
<translation>Наистина ли искате да отмените текущият процес на инсталиране?
Инсталатора ще прекъсне и всичките промени ще бъдат загубени.</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="331"/>
<source>&amp;Yes</source>
<translation>&amp;Да</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="332"/>
<source>&amp;No</source>
<translation>&amp;Не</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="163"/>
<source>&amp;Close</source>
<translation>&amp;Затвори</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="237"/>
<source>Continue with setup?</source>
<translation>Продължаване?</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="238"/>
<source>The %1 installer is about to make changes to your disk in order to install %2.&lt;br/&gt;&lt;strong&gt;You will not be able to undo these changes.&lt;/strong&gt;</source>
<translation>Инсталатора на %1 ще направи промени по вашия диск за да инсталира %2. &lt;br&gt;&lt;strong&gt;Промените ще бъдат окончателни.&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="243"/>
<source>&amp;Install now</source>
<translation>&amp;Инсталирай сега</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="244"/>
<source>Go &amp;back</source>
<translation>В&amp;ръщане</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="283"/>
<source>&amp;Done</source>
<translation>&amp;Готово</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="284"/>
<source>The installation is complete. Close the installer.</source>
<translation>Инсталацията е завършена. Затворете инсталаторa.</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="160"/>
<source>Error</source>
<translation>Грешка</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="161"/>
<source>Installation Failed</source>
<translation>Неуспешна инсталация</translation>
</message>
</context>
<context>
<name>CalamaresPython::Helper</name>
<message>
<location filename="../src/libcalamares/PythonHelper.cpp" line="270"/>
<source>Unknown exception type</source>
<translation>Неизвестен тип изключение</translation>
</message>
<message>
<location filename="../src/libcalamares/PythonHelper.cpp" line="284"/>
<source>unparseable Python error</source>
<translation>неанализируема Python грешка</translation>
</message>
<message>
<location filename="../src/libcalamares/PythonHelper.cpp" line="324"/>
<source>unparseable Python traceback</source>
<translation>неанализируемо Python проследяване</translation>
</message>
<message>
<location filename="../src/libcalamares/PythonHelper.cpp" line="329"/>
<source>Unfetchable Python error.</source>
<translation>Недостъпна Python грешка.</translation>
</message>
</context>
<context>
<name>CalamaresWindow</name>
<message>
<location filename="../src/calamares/CalamaresWindow.cpp" line="44"/>
<source>%1 Installer</source>
<translation>%1 Инсталатор</translation>
</message>
<message>
<location filename="../src/calamares/CalamaresWindow.cpp" line="111"/>
<source>Show debug information</source>
<translation>Покажи информация за отстраняване на грешки</translation>
</message>
</context>
<context>
<name>CheckerWidget</name>
<message>
<location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="96"/>
<source>This computer does not satisfy the minimum requirements for installing %1.&lt;br/&gt;Installation cannot continue. &lt;a href=&quot;#details&quot;&gt;Details...&lt;/a&gt;</source>
<translation>Този компютър не отговаря на минималните изисквания за инсталиране %1.&lt;br/&gt;Инсталацията не може да продължи.
&lt;a href=&quot;#details&quot;&gt;Детайли...&lt;/a&gt;</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="113"/>
<source>This computer does not satisfy some of the recommended requirements for installing %1.&lt;br/&gt;Installation can continue, but some features might be disabled.</source>
<translation>Този компютър не отговаря на някои от препоръчителните изисквания за инсталиране %1.&lt;br/&gt;Инсталацията може да продължи, но някои свойства могат да бъдат недостъпни.</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="151"/>
<source>This program will ask you some questions and set up %2 on your computer.</source>
<translation>Тази програма ще ви зададе няколко въпроса и ще конфигурира %2 на вашия компютър.</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="174"/>
<source>For best results, please ensure that this computer:</source>
<translation>За най-добри резултати, моля бъдете сигурни че този компютър:</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="202"/>
<source>System requirements</source>
<translation>Системни изисквания</translation>
</message>
</context>
<context>
<name>ChoicePage</name>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.ui" line="14"/>
<source>Form</source>
<translation>Форма</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="128"/>
<source>After:</source>
<translation>След:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="235"/>
<source>&lt;strong&gt;Manual partitioning&lt;/strong&gt;&lt;br/&gt;You can create or resize partitions yourself.</source>
<translation>&lt;strong&gt;Самостоятелно поделяне&lt;/strong&gt;&lt;br/&gt;Можете да създадете или преоразмерите дяловете сами.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="998"/>
<source>Boot loader location:</source>
<translation>Локация на програмата за начално зареждане:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="942"/>
<source>%1 will be shrunk to %2MB and a new %3MB partition will be created for %4.</source>
<translation>%1 ще се смали до %2МБ и нов %3МБ дял ще бъде създаден за %4.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="126"/>
<source>Select storage de&amp;vice:</source>
<translation>Изберете ус&amp;тройство за съхранение:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="127"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="924"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="970"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1049"/>
<source>Current:</source>
<translation>Сегашен:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="795"/>
<source>Reuse %1 as home partition for %2.</source>
<translation>Използване на %1 като домашен дял за %2</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="925"/>
<source>&lt;strong&gt;Select a partition to shrink, then drag the bottom bar to resize&lt;/strong&gt;</source>
<translation>&lt;strong&gt;Изберете дял за смаляване, после влачете долната лента за преоразмеряване&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1040"/>
<source>&lt;strong&gt;Select a partition to install on&lt;/strong&gt;</source>
<translation>&lt;strong&gt;Изберете дял за инсталацията&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1096"/>
<source>An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1.</source>
<translation>EFI системен дял не е намерен. Моля, опитайте пак като използвате ръчно поделяне за %1.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1105"/>
<source>The EFI system partition at %1 will be used for starting %2.</source>
<translation>EFI системен дял в %1 ще бъде използван за стартиране на %2.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1113"/>
<source>EFI system partition:</source>
<translation>EFI системен дял:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1200"/>
<source>This storage device does not seem to have an operating system on it. What would you like to do?&lt;br/&gt;You will be able to review and confirm your choices before any change is made to the storage device.</source>
<translation>Това устройство за съхранение няма инсталирана операционна система. Какво ще правите?&lt;br/&gt;Ще може да прегледате и потвърдите избора си, преди да се направят промени по устройството за съхранение.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1205"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1242"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1264"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1288"/>
<source>&lt;strong&gt;Erase disk&lt;/strong&gt;&lt;br/&gt;This will &lt;font color=&quot;red&quot;&gt;delete&lt;/font&gt; all data currently present on the selected storage device.</source>
<translation>&lt;strong&gt;Изтриване на диска&lt;/strong&gt;&lt;br/&gt;Това ще &lt;font color=&quot;red&quot;&gt;изтрие&lt;/font&gt; всички данни върху устройството за съхранение.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1232"/>
<source>This storage device has %1 on it. What would you like to do?&lt;br/&gt;You will be able to review and confirm your choices before any change is made to the storage device.</source>
<translation>Това устройство за съхранение има инсталиран %1. Какво ще правите?&lt;br/&gt;Ще може да прегледате и потвърдите избора си, преди да се направят промени по устройството за съхранение.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1209"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1238"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1260"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1284"/>
<source>&lt;strong&gt;Install alongside&lt;/strong&gt;&lt;br/&gt;The installer will shrink a partition to make room for %1.</source>
<translation>&lt;strong&gt;Инсталирайте покрай&lt;/strong&gt;&lt;br/&gt;Инсталатора ще раздроби дяла за да направи място за %1.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1213"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1247"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1268"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1292"/>
<source>&lt;strong&gt;Replace a partition&lt;/strong&gt;&lt;br/&gt;Replaces a partition with %1.</source>
<translation>&lt;strong&gt;Замени дял&lt;/strong&gt;&lt;br/&gt;Заменя този дял с %1.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1255"/>
<source>This storage device already has an operating system on it. What would you like to do?&lt;br/&gt;You will be able to review and confirm your choices before any change is made to the storage device.</source>
<translation>Това устройство за съхранение има инсталирана операционна система. Какво ще правите?&lt;br/&gt;Ще може да прегледате и потвърдите избора си, преди да се направят промени по устройството за съхранение.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1279"/>
<source>This storage device has multiple operating systems on it. What would you like to do?&lt;br/&gt;You will be able to review and confirm your choices before any change is made to the storage device.</source>
<translation>Това устройство за съхранение има инсталирани операционни системи. Какво ще правите?&lt;br/&gt;Ще може да прегледате и потвърдите избора си, преди да се направят промени по устройството за съхранение.</translation>
</message>
</context>
<context>
<name>ClearMountsJob</name>
<message>
<location filename="../src/modules/partition/jobs/ClearMountsJob.cpp" line="46"/>
<source>Clear mounts for partitioning operations on %1</source>
<translation>Разчисти монтиранията за операциите на подялбата на %1</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ClearMountsJob.cpp" line="54"/>
<source>Clearing mounts for partitioning operations on %1.</source>
<translation>Разчистване на монтиранията за операциите на подялбата на %1</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ClearMountsJob.cpp" line="191"/>
<source>Cleared all mounts for %1</source>
<translation>Разчистени всички монтирания за %1</translation>
</message>
</context>
<context>
<name>ClearTempMountsJob</name>
<message>
<location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="42"/>
<source>Clear all temporary mounts.</source>
<translation>Разчисти всички временни монтирания.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="49"/>
<source>Clearing all temporary mounts.</source>
<translation>Разчистване на всички временни монтирания.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="60"/>
<source>Cannot get list of temporary mounts.</source>
<translation>Не може да се вземе лист от временни монтирания.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="99"/>
<source>Cleared all temporary mounts.</source>
<translation>Разчистени всички временни монтирания.</translation>
</message>
</context>
<context>
<name>CommandList</name>
<message>
<location filename="../src/libcalamares/utils/CommandList.cpp" line="127"/>
<location filename="../src/libcalamares/utils/CommandList.cpp" line="138"/>
<source>Could not run command.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/libcalamares/utils/CommandList.cpp" line="128"/>
<source>The command runs in the host environment and needs to know the root path, but no rootMountPoint is defined.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/libcalamares/utils/CommandList.cpp" line="139"/>
<source>The command needs to know the user&apos;s name, but no username is defined.</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>ContextualProcessJob</name>
<message>
<location filename="../src/modules/contextualprocess/ContextualProcessJob.cpp" line="117"/>
<source>Contextual Processes Job</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>CreatePartitionDialog</name>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="14"/>
<source>Create a Partition</source>
<translation>Създай дял</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="48"/>
<source> MiB</source>
<translation>MiB</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="55"/>
<source>Partition &amp;Type:</source>
<translation>&amp;Тип на дяла:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="67"/>
<source>&amp;Primary</source>
<translation>&amp;Основен</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="77"/>
<source>E&amp;xtended</source>
<translation>Р&amp;азширен</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="119"/>
<source>Fi&amp;le System:</source>
<translation>Фа&amp;йлова система:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="151"/>
<source>LVM LV name</source>
<translation>LVM LV име</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="188"/>
<source>Flags:</source>
<translation>Флагове:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="161"/>
<source>&amp;Mount Point:</source>
<translation>Точка на &amp;монтиране:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="38"/>
<source>Si&amp;ze:</source>
<translation>Раз&amp;мер:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="72"/>
<source>En&amp;crypt</source>
<translation>En%crypt</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="151"/>
<source>Logical</source>
<translation>Логическа</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="156"/>
<source>Primary</source>
<translation>Главна</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="173"/>
<source>GPT</source>
<translation>GPT</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="262"/>
<source>Mountpoint already in use. Please select another one.</source>
<translation>Точката за монтиране вече се използва. Моля изберете друга.</translation>
</message>
</context>
<context>
<name>CreatePartitionJob</name>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="44"/>
<source>Create new %2MB partition on %4 (%3) with file system %1.</source>
<translation>Създай нов %2МБ дял върху %4 (%3) със файлова система %1.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="55"/>
<source>Create new &lt;strong&gt;%2MB&lt;/strong&gt; partition on &lt;strong&gt;%4&lt;/strong&gt; (%3) with file system &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>Създай нов &lt;strong&gt;%2МБ&lt;/strong&gt; дял върху &lt;strong&gt;%4&lt;/strong&gt; (%3) със файлова система &lt;strong&gt;%1&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="67"/>
<source>Creating new %1 partition on %2.</source>
<translation>Създаване на нов %1 дял върху %2.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="79"/>
<source>The installer failed to create partition on disk &apos;%1&apos;.</source>
<translation>Инсталатора не успя да създаде дял върху диск &apos;%1&apos;.</translation>
</message>
</context>
<context>
<name>CreatePartitionTableDialog</name>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="20"/>
<source>Create Partition Table</source>
<translation>Създай таблица на дяловете</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="39"/>
<source>Creating a new partition table will delete all existing data on the disk.</source>
<translation>Създаването на нова таблица на дяловете ще изтрие всички съществуващи данни на диска.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="65"/>
<source>What kind of partition table do you want to create?</source>
<translation>Какъв тип таблица на дяловете искате да създадете?</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="72"/>
<source>Master Boot Record (MBR)</source>
<translation>Сектор за начално зареждане (MBR)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="82"/>
<source>GUID Partition Table (GPT)</source>
<translation>GUID Таблица на дяловете (GPT)</translation>
</message>
</context>
<context>
<name>CreatePartitionTableJob</name>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="45"/>
<source>Create new %1 partition table on %2.</source>
<translation>Създай нова %1 таблица на дяловете върху %2.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="52"/>
<source>Create new &lt;strong&gt;%1&lt;/strong&gt; partition table on &lt;strong&gt;%2&lt;/strong&gt; (%3).</source>
<translation>Създай нова &lt;strong&gt;%1&lt;/strong&gt; таблица на дяловете върху &lt;strong&gt;%2&lt;/strong&gt; (%3).</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="62"/>
<source>Creating new %1 partition table on %2.</source>
<translation>Създаване на нова %1 таблица на дяловете върху %2.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="72"/>
<source>The installer failed to create a partition table on %1.</source>
<translation>Инсталатора не можа да създаде таблица на дяловете върху %1.</translation>
</message>
</context>
<context>
<name>CreateUserJob</name>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="51"/>
<source>Create user %1</source>
<translation>Създай потребител %1</translation>
</message>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="58"/>
<source>Create user &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>Създай потребител &lt;strong&gt;%1&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="65"/>
<source>Creating user %1.</source>
<translation>Създаване на потребител %1.</translation>
</message>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="81"/>
<source>Sudoers dir is not writable.</source>
<translation>Директорията sudoers е незаписваема.</translation>
</message>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="85"/>
<source>Cannot create sudoers file for writing.</source>
<translation>Не може да се създаде sudoers файл за записване.</translation>
</message>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="93"/>
<source>Cannot chmod sudoers file.</source>
<translation>Не може да се изпълни chmod върху sudoers файла.</translation>
</message>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="99"/>
<source>Cannot open groups file for reading.</source>
<translation>Не може да се отвори файла на групите за четене.</translation>
</message>
</context>
<context>
<name>DeletePartitionJob</name>
<message>
<location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="40"/>
<source>Delete partition %1.</source>
<translation>Изтрий дял %1.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="48"/>
<source>Delete partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>Изтриване на дял &lt;strong&gt;%1&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="56"/>
<source>Deleting partition %1.</source>
<translation>Изтриване на дял %1.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="68"/>
<source>The installer failed to delete partition %1.</source>
<translation>Инсталатора не успя да изтрие дял %1.</translation>
</message>
</context>
<context>
<name>DeviceInfoWidget</name>
<message>
<location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="150"/>
<source>The type of &lt;strong&gt;partition table&lt;/strong&gt; on the selected storage device.&lt;br&gt;&lt;br&gt;The only way to change the partition table type is to erase and recreate the partition table from scratch, which destroys all data on the storage device.&lt;br&gt;This installer will keep the current partition table unless you explicitly choose otherwise.&lt;br&gt;If unsure, on modern systems GPT is preferred.</source>
<translation>Типа на &lt;strong&gt;таблицата на дяловете&lt;/strong&gt; на избраното устройство за съхранение.&lt;br&gt;&lt;br&gt;Единствения начин да се промени е като се изчисти и пресъздаде таблицата на дяловете, като по този начин всички данни върху устройството ще бъдат унищожени.&lt;br&gt;Инсталатора ще запази сегашната таблица на дяловете, освен ако не изберете обратното.&lt;br&gt;Ако не сте сигурни - за модерни системи се препоръчва GPT.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="107"/>
<source>This device has a &lt;strong&gt;%1&lt;/strong&gt; partition table.</source>
<translation>Устройството има &lt;strong&gt;%1&lt;/strong&gt; таблица на дяловете.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="114"/>
<source>This is a &lt;strong&gt;loop&lt;/strong&gt; device.&lt;br&gt;&lt;br&gt;It is a pseudo-device with no partition table that makes a file accessible as a block device. This kind of setup usually only contains a single filesystem.</source>
<translation>Това е &lt;strong&gt;loop&lt;/strong&gt; устройство.&lt;br&gt;&lt;br&gt;Представлява псевдо-устройство, без таблица на дяловете, което прави файловете достъпни като блок устройства. Обикновено съдържа само една файлова система.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="121"/>
<source>This installer &lt;strong&gt;cannot detect a partition table&lt;/strong&gt; on the selected storage device.&lt;br&gt;&lt;br&gt;The device either has no partition table, or the partition table is corrupted or of an unknown type.&lt;br&gt;This installer can create a new partition table for you, either automatically, or through the manual partitioning page.</source>
<translation>Инсталатора &lt;strong&gt;не може да открие таблица на дяловете&lt;/strong&gt; на избраното устройство за съхранение.&lt;br&gt;&lt;br&gt;Таблицата на дяловете липсва, повредена е или е от неизвестен тип.&lt;br&gt;Инсталатора може да създаде нова таблица на дяловете автоматично или ръчно, чрез програмата за подялба.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="131"/>
<source>&lt;br&gt;&lt;br&gt;This is the recommended partition table type for modern systems which start from an &lt;strong&gt;EFI&lt;/strong&gt; boot environment.</source>
<translation>&lt;br&gt;&lt;br&gt;Това е препоръчаният тип на таблицата на дяловете за модерни системи, които стартират от &lt;strong&gt;EFI&lt;/strong&gt; среда за начално зареждане.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="137"/>
<source>&lt;br&gt;&lt;br&gt;This partition table type is only advisable on older systems which start from a &lt;strong&gt;BIOS&lt;/strong&gt; boot environment. GPT is recommended in most other cases.&lt;br&gt;&lt;br&gt;&lt;strong&gt;Warning:&lt;/strong&gt; the MBR partition table is an obsolete MS-DOS era standard.&lt;br&gt;Only 4 &lt;em&gt;primary&lt;/em&gt; partitions may be created, and of those 4, one can be an &lt;em&gt;extended&lt;/em&gt; partition, which may in turn contain many &lt;em&gt;logical&lt;/em&gt; partitions.</source>
<translation>&lt;br&gt;&lt;br&gt;Тази таблица на дяловете е препоръчителна само за стари системи, които стартират с &lt;strong&gt;BIOS&lt;/strong&gt; среда за начално зареждане. GPT е препоръчителна в повечето случаи.&lt;br&gt;&lt;br&gt;&lt;strong&gt;Внимание:&lt;/strong&gt; MBR таблица на дяловете е остарял стандарт от времето на MS-DOS.&lt;br&gt;Само 4 &lt;em&gt;главни&lt;/em&gt; дяла могат да бъдат създадени и от тях само един може да е &lt;em&gt;разширен&lt;/em&gt; дял, който може да съдържа много &lt;em&gt;логически&lt;/em&gt; дялове.</translation>
</message>
</context>
<context>
<name>DeviceModel</name>
<message>
<location filename="../src/modules/partition/core/DeviceModel.cpp" line="80"/>
<source>%1 - %2 (%3)</source>
<translation>%1 - %2 (%3)</translation>
</message>
</context>
<context>
<name>DracutLuksCfgJob</name>
<message>
<location filename="../src/modules/dracutlukscfg/DracutLuksCfgJob.cpp" line="131"/>
<source>Write LUKS configuration for Dracut to %1</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/dracutlukscfg/DracutLuksCfgJob.cpp" line="133"/>
<source>Skip writing LUKS configuration for Dracut: &quot;/&quot; partition is not encrypted</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/dracutlukscfg/DracutLuksCfgJob.cpp" line="149"/>
<source>Failed to open %1</source>
<translation>Неуспешно отваряне на %1</translation>
</message>
</context>
<context>
<name>DummyCppJob</name>
<message>
<location filename="../src/modules/dummycpp/DummyCppJob.cpp" line="47"/>
<source>Dummy C++ Job</source>
<translation>Фиктивна С++ задача</translation>
</message>
</context>
<context>
<name>EditExistingPartitionDialog</name>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="20"/>
<source>Edit Existing Partition</source>
<translation>Редактирай съществуващ дял</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="50"/>
<source>Content:</source>
<translation>Съдържание:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="60"/>
<source>&amp;Keep</source>
<translation>&amp;Запази</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="70"/>
<source>Format</source>
<translation>Форматирай</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="89"/>
<source>Warning: Formatting the partition will erase all existing data.</source>
<translation>Предупреждение: Форматирането на дялът ще изтрие всички съществуващи данни.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="99"/>
<source>&amp;Mount Point:</source>
<translation>&amp;Точка на монтиране:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="119"/>
<source>Si&amp;ze:</source>
<translation>Раз&amp;мер:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="129"/>
<source> MiB</source>
<translation>MiB</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="136"/>
<source>Fi&amp;le System:</source>
<translation>Фа&amp;йлова система:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="149"/>
<source>Flags:</source>
<translation>Флагове:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.cpp" line="269"/>
<source>Mountpoint already in use. Please select another one.</source>
<translation>Точката за монтиране вече се използва. Моля изберете друга.</translation>
</message>
</context>
<context>
<name>EncryptWidget</name>
<message>
<location filename="../src/modules/partition/gui/EncryptWidget.ui" line="14"/>
<source>Form</source>
<translation>Форма</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EncryptWidget.ui" line="32"/>
<source>En&amp;crypt system</source>
<translation>Крип&amp;тиране на системата</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EncryptWidget.ui" line="42"/>
<source>Passphrase</source>
<translation>Парола</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EncryptWidget.ui" line="52"/>
<source>Confirm passphrase</source>
<translation>Потвърди паролата</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EncryptWidget.cpp" line="151"/>
<source>Please enter the same passphrase in both boxes.</source>
<translation>Моля, въведете еднаква парола в двете полета.</translation>
</message>
</context>
<context>
<name>FillGlobalStorageJob</name>
<message>
<location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="123"/>
<source>Set partition information</source>
<translation>Постави информация за дял</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="147"/>
<source>Install %1 on &lt;strong&gt;new&lt;/strong&gt; %2 system partition.</source>
<translation>Инсталирай %1 на &lt;strong&gt;нов&lt;/strong&gt; %2 системен дял.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="151"/>
<source>Set up &lt;strong&gt;new&lt;/strong&gt; %2 partition with mount point &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>Създай &lt;strong&gt;нов&lt;/strong&gt; %2 дял със точка на монтиране &lt;strong&gt;%1&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="159"/>
<source>Install %2 on %3 system partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>Инсталирай %2 на %3 системен дял &lt;strong&gt;%1&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="164"/>
<source>Set up %3 partition &lt;strong&gt;%1&lt;/strong&gt; with mount point &lt;strong&gt;%2&lt;/strong&gt;.</source>
<translation>Създай %3 дял &lt;strong&gt;%1&lt;/strong&gt; с точка на монтиране &lt;strong&gt;%2&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="176"/>
<source>Install boot loader on &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>Инсталиране на зареждач върху &lt;strong&gt;%1&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="186"/>
<source>Setting up mount points.</source>
<translation>Настройка на точките за монтиране.</translation>
</message>
</context>
<context>
<name>FinishedPage</name>
<message>
<location filename="../src/modules/finished/FinishedPage.ui" line="14"/>
<source>Form</source>
<translation>Форма</translation>
</message>
<message>
<location filename="../src/modules/finished/FinishedPage.ui" line="95"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;When this box is checked, your system will restart immediately when you click on &lt;span style=&quot; font-style:italic;&quot;&gt;Done&lt;/span&gt; or close the installer.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/finished/FinishedPage.ui" line="98"/>
<source>&amp;Restart now</source>
<translation>&amp;Рестартирай сега</translation>
</message>
<message>
<location filename="../src/modules/finished/FinishedPage.cpp" line="51"/>
<source>&lt;h1&gt;All done.&lt;/h1&gt;&lt;br/&gt;%1 has been installed on your computer.&lt;br/&gt;You may now restart into your new system, or continue using the %2 Live environment.</source>
<translation>&lt;h1&gt;Завършено.&lt;/h1&gt;&lt;br/&gt;%1 беше инсталирана на вашият компютър.&lt;br/&gt;Вече можете да рестартирате в новата си система или да продължите да използвате %2 Живата среда.</translation>
</message>
<message>
<location filename="../src/modules/finished/FinishedPage.cpp" line="109"/>
<source>&lt;h1&gt;Installation Failed&lt;/h1&gt;&lt;br/&gt;%1 has not been installed on your computer.&lt;br/&gt;The error message was: %2.</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>FinishedViewStep</name>
<message>
<location filename="../src/modules/finished/FinishedViewStep.cpp" line="59"/>
<source>Finish</source>
<translation>Завърши</translation>
</message>
<message>
<location filename="../src/modules/finished/FinishedViewStep.cpp" line="124"/>
<source>Installation Complete</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/finished/FinishedViewStep.cpp" line="125"/>
<source>The installation of %1 is complete.</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>FormatPartitionJob</name>
<message>
<location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="41"/>
<source>Format partition %1 (file system: %2, size: %3 MB) on %4.</source>
<translation>Форматирай дял %1 (файлова система: %2, размер: %3 МБ) on %4.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="52"/>
<source>Format &lt;strong&gt;%3MB&lt;/strong&gt; partition &lt;strong&gt;%1&lt;/strong&gt; with file system &lt;strong&gt;%2&lt;/strong&gt;.</source>
<translation>Форматирай &lt;strong&gt;%3МБ&lt;/strong&gt; дял &lt;strong&gt;%1&lt;/strong&gt; с файлова система &lt;strong&gt;%2&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="63"/>
<source>Formatting partition %1 with file system %2.</source>
<translation>Форматирай дял %1 с файлова система %2.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="77"/>
<source>The installer failed to format partition %1 on disk &apos;%2&apos;.</source>
<translation>Инсталатора не успя да форматира дял %1 на диск &apos;%2&apos;.</translation>
</message>
</context>
<context>
<name>InteractiveTerminalPage</name>
<message>
<location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="53"/>
<source>Konsole not installed</source>
<translation>Konsole не е инсталиран</translation>
</message>
<message>
<location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="54"/>
<source>Please install KDE Konsole and try again!</source>
<translation>Моля, инсталирайте KDE Konsole и опитайте отново!</translation>
</message>
<message>
<location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="116"/>
<source>Executing script: &amp;nbsp;&lt;code&gt;%1&lt;/code&gt;</source>
<translation>Изпълняване на скрипт: &amp;nbsp;&lt;code&gt;%1&lt;/code&gt;</translation>
</message>
</context>
<context>
<name>InteractiveTerminalViewStep</name>
<message>
<location filename="../src/modules/interactiveterminal/InteractiveTerminalViewStep.cpp" line="45"/>
<source>Script</source>
<translation>Скрипт</translation>
</message>
</context>
<context>
<name>KeyboardPage</name>
<message>
<location filename="../src/modules/keyboard/KeyboardPage.cpp" line="219"/>
<source>Set keyboard model to %1.&lt;br/&gt;</source>
<translation>Постави модел на клавиатурата на %1.&lt;br/&gt;</translation>
</message>
<message>
<location filename="../src/modules/keyboard/KeyboardPage.cpp" line="221"/>
<source>Set keyboard layout to %1/%2.</source>
<translation>Постави оформлението на клавиатурата на %1/%2.</translation>
</message>
</context>
<context>
<name>KeyboardViewStep</name>
<message>
<location filename="../src/modules/keyboard/KeyboardViewStep.cpp" line="50"/>
<source>Keyboard</source>
<translation>Клавиатура</translation>
</message>
</context>
<context>
<name>LCLocaleDialog</name>
<message>
<location filename="../src/modules/locale/LCLocaleDialog.cpp" line="34"/>
<source>System locale setting</source>
<translation>Настройка на локацията на системата</translation>
</message>
<message>
<location filename="../src/modules/locale/LCLocaleDialog.cpp" line="41"/>
<source>The system locale setting affects the language and character set for some command line user interface elements.&lt;br/&gt;The current setting is &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>Локацията на системата засяга езика и символите зададени за някои елементи на командния ред.&lt;br/&gt;Текущата настройка е &lt;strong&gt;%1&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/locale/LCLocaleDialog.cpp" line="66"/>
<source>&amp;Cancel</source>
<translation>&amp;Отказ</translation>
</message>
<message>
<location filename="../src/modules/locale/LCLocaleDialog.cpp" line="67"/>
<source>&amp;OK</source>
<translation>&amp;ОК</translation>
</message>
</context>
<context>
<name>LicensePage</name>
<message>
<location filename="../src/modules/license/LicensePage.ui" line="14"/>
<source>Form</source>
<translation>Форма</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="89"/>
<source>I accept the terms and conditions above.</source>
<translation>Приемам лицензионните условия.</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="116"/>
<source>&lt;h1&gt;License Agreement&lt;/h1&gt;This setup procedure will install proprietary software that is subject to licensing terms.</source>
<translation>&lt;h1&gt;Лицензионно Споразумение&lt;/h1&gt;Тази процедура ще инсталира несвободен софтуер, който е обект на лицензионни условия.</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="119"/>
<source>Please review the End User License Agreements (EULAs) above.&lt;br/&gt;If you do not agree with the terms, the setup procedure cannot continue.</source>
<translation>Моля погледнете Лицензионните Условия за Крайния Потребител (ЛУКП).&lt;br/&gt;Ако не сте съгласни с условията, процедурата не може да продължи.</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="125"/>
<source>&lt;h1&gt;License Agreement&lt;/h1&gt;This setup procedure can install proprietary software that is subject to licensing terms in order to provide additional features and enhance the user experience.</source>
<translation>&lt;h1&gt;Лицензионно Споразумение&lt;/h1&gt;Тази процедура може да инсталира несвободен софтуер, който е обект на лицензионни условия, за да предостави допълнителни функции и да подобри работата на потребителя.</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="130"/>
<source>Please review the End User License Agreements (EULAs) above.&lt;br/&gt;If you do not agree with the terms, proprietary software will not be installed, and open source alternatives will be used instead.</source>
<translation>Моля погледнете Лицензионните Условия за Крайния Потребител (ЛУКП).&lt;br/&gt;Ако не сте съгласни с условията, несвободния софтуер няма да бъде инсталиран и ще бъдат използвани безплатни алтернативи.</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="160"/>
<source>&lt;strong&gt;%1 driver&lt;/strong&gt;&lt;br/&gt;by %2</source>
<extracomment>%1 is an untranslatable product name, example: Creative Audigy driver</extracomment>
<translation>&lt;strong&gt;%1 драйвър&lt;/strong&gt;&lt;br/&gt;от %2</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="167"/>
<source>&lt;strong&gt;%1 graphics driver&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
<extracomment>%1 is usually a vendor name, example: Nvidia graphics driver</extracomment>
<translation>&lt;strong&gt;%1 графичен драйвър&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;от %2&lt;/font&gt;</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="173"/>
<source>&lt;strong&gt;%1 browser plugin&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
<translation>&lt;strong&gt;%1 плъгин за браузър&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;от %2&lt;/font&gt;</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="179"/>
<source>&lt;strong&gt;%1 codec&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
<translation>&lt;strong&gt;%1 кодек&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;от %2&lt;/font&gt;</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="185"/>
<source>&lt;strong&gt;%1 package&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
<translation>&lt;strong&gt;%1 пакет&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;от %2&lt;/font&gt;</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="191"/>
<source>&lt;strong&gt;%1&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
<translation>&lt;strong&gt;%1&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;от %2&lt;/font&gt;</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="203"/>
<source>&lt;a href=&quot;%1&quot;&gt;view license agreement&lt;/a&gt;</source>
<translation>&lt;a href=&quot;%1&quot;&gt;виж лицензионното споразумение&lt;/a&gt;</translation>
</message>
</context>
<context>
<name>LicenseViewStep</name>
<message>
<location filename="../src/modules/license/LicenseViewStep.cpp" line="51"/>
<source>License</source>
<translation>Лиценз</translation>
</message>
</context>
<context>
<name>LocalePage</name>
<message>
<location filename="../src/modules/locale/LocalePage.cpp" line="387"/>
<source>The system language will be set to %1.</source>
<translation>Системният език ще бъде %1.</translation>
</message>
<message>
<location filename="../src/modules/locale/LocalePage.cpp" line="389"/>
<source>The numbers and dates locale will be set to %1.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/locale/LocalePage.cpp" line="215"/>
<source>Region:</source>
<translation>Регион:</translation>
</message>
<message>
<location filename="../src/modules/locale/LocalePage.cpp" line="216"/>
<source>Zone:</source>
<translation>Зона:</translation>
</message>
<message>
<location filename="../src/modules/locale/LocalePage.cpp" line="220"/>
<location filename="../src/modules/locale/LocalePage.cpp" line="221"/>
<source>&amp;Change...</source>
<translation>&amp;Промени...</translation>
</message>
<message>
<location filename="../src/modules/locale/LocalePage.cpp" line="398"/>
<source>Set timezone to %1/%2.&lt;br/&gt;</source>
<translation>Постави часовата зона на %1/%2.&lt;br/&gt;</translation>
</message>
<message>
<location filename="../src/modules/locale/LocalePage.cpp" line="480"/>
<source>%1 (%2)</source>
<extracomment>Language (Country)</extracomment>
<translation>%1 (%2)</translation>
</message>
</context>
<context>
<name>LocaleViewStep</name>
<message>
<location filename="../src/modules/locale/LocaleViewStep.cpp" line="60"/>
<source>Loading location data...</source>
<translation>Зареждане на данните за местоположение</translation>
</message>
<message>
<location filename="../src/modules/locale/LocaleViewStep.cpp" line="175"/>
<source>Location</source>
<translation>Местоположение</translation>
</message>
</context>
<context>
<name>NetInstallPage</name>
<message>
<location filename="../src/modules/netinstall/NetInstallPage.cpp" line="64"/>
<source>Name</source>
<translation>Име</translation>
</message>
<message>
<location filename="../src/modules/netinstall/NetInstallPage.cpp" line="65"/>
<source>Description</source>
<translation>Описание</translation>
</message>
<message>
<location filename="../src/modules/netinstall/NetInstallPage.cpp" line="86"/>
<source>Network Installation. (Disabled: Unable to fetch package lists, check your network connection)</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/netinstall/NetInstallPage.cpp" line="96"/>
<source>Network Installation. (Disabled: Received invalid groups data)</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>NetInstallViewStep</name>
<message>
<location filename="../src/modules/netinstall/NetInstallViewStep.cpp" line="54"/>
<source>Package selection</source>
<translation>Избор на пакети</translation>
</message>
</context>
<context>
<name>PWQ</name>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="63"/>
<source>Password is too short</source>
<translation>Паролата е твърде кратка</translation>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="85"/>
<source>Password is too long</source>
<translation>Паролата е твърде дълга</translation>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="151"/>
<source>Password is too weak</source>
<translation>Паролата е твърде слаба</translation>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="158"/>
<source>Memory allocation error when setting &apos;%1&apos;</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="162"/>
<source>Memory allocation error</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="164"/>
<source>The password is the same as the old one</source>
<translation>Паролата съвпада с предишната</translation>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="166"/>
<source>The password is a palindrome</source>
<translation>Паролата е палиндром</translation>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="168"/>
<source>The password differs with case changes only</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="170"/>
<source>The password is too similar to the old one</source>
<translation>Паролата е твърде сходна с предишната</translation>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="172"/>
<source>The password contains the user name in some form</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="174"/>
<source>The password contains words from the real name of the user in some form</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="176"/>
<source>The password contains forbidden words in some form</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="179"/>
<source>The password contains less than %1 digits</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="180"/>
<source>The password contains too few digits</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="183"/>
<source>The password contains less than %1 uppercase letters</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="184"/>
<source>The password contains too few uppercase letters</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="187"/>
<source>The password contains less than %1 lowercase letters</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="188"/>
<source>The password contains too few lowercase letters</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="191"/>
<source>The password contains less than %1 non-alphanumeric characters</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="192"/>
<source>The password contains too few non-alphanumeric characters</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="195"/>
<source>The password is shorter than %1 characters</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="196"/>
<source>The password is too short</source>
<translation>Паролата е твърде кратка</translation>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="198"/>
<source>The password is just rotated old one</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="201"/>
<source>The password contains less than %1 character classes</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="202"/>
<source>The password does not contain enough character classes</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="205"/>
<source>The password contains more than %1 same characters consecutively</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="206"/>
<source>The password contains too many same characters consecutively</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="209"/>
<source>The password contains more than %1 characters of the same class consecutively</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="210"/>
<source>The password contains too many characters of the same class consecutively</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="213"/>
<source>The password contains monotonic sequence longer than %1 characters</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="214"/>
<source>The password contains too long of a monotonic character sequence</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="216"/>
<source>No password supplied</source>
<translation>Липсва парола</translation>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="218"/>
<source>Cannot obtain random numbers from the RNG device</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="220"/>
<source>Password generation failed - required entropy too low for settings</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="225"/>
<source>The password fails the dictionary check - %1</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="227"/>
<source>The password fails the dictionary check</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="231"/>
<source>Unknown setting - %1</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="235"/>
<source>Unknown setting</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="239"/>
<source>Bad integer value of setting - %1</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="243"/>
<source>Bad integer value</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="247"/>
<source>Setting %1 is not of integer type</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="251"/>
<source>Setting is not of integer type</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="255"/>
<source>Setting %1 is not of string type</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="259"/>
<source>Setting is not of string type</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="261"/>
<source>Opening the configuration file failed</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="263"/>
<source>The configuration file is malformed</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="265"/>
<source>Fatal failure</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/CheckPWQuality.cpp" line="267"/>
<source>Unknown error</source>
<translation>Неизвестна грешка</translation>
</message>
</context>
<context>
<name>Page_Keyboard</name>
<message>
<location filename="../src/modules/keyboard/KeyboardPage.ui" line="14"/>
<source>Form</source>
<translation>Форма</translation>
</message>
<message>
<location filename="../src/modules/keyboard/KeyboardPage.ui" line="70"/>
<source>Keyboard Model:</source>
<translation>Модел на клавиатура:</translation>
</message>
<message>
<location filename="../src/modules/keyboard/KeyboardPage.ui" line="131"/>
<source>Type here to test your keyboard</source>
<translation>Пишете тук за да тествате вашата клавиатура</translation>
</message>
</context>
<context>
<name>Page_UserSetup</name>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="14"/>
<source>Form</source>
<translation>Форма</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="36"/>
<source>What is your name?</source>
<translation>Какво е вашето име?</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="117"/>
<source>What name do you want to use to log in?</source>
<translation>Какво име искате да използвате за влизане?</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="306"/>
<location filename="../src/modules/users/page_usersetup.ui" line="437"/>
<location filename="../src/modules/users/page_usersetup.ui" line="582"/>
<source>font-weight: normal</source>
<translation>font-weight: нормална</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="200"/>
<source>&lt;small&gt;If more than one person will use this computer, you can set up multiple accounts after installation.&lt;/small&gt;</source>
<translation>&lt;small&gt;Ако повече от един човек ще използва този компютър, можете да поставите неколкократни акаунти след инсталацията.&lt;/small&gt;</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="335"/>
<source>Choose a password to keep your account safe.</source>
<translation>Изберете парола за да държите вашият акаунт в безопасност.</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="440"/>
<source>&lt;small&gt;Enter the same password twice, so that it can be checked for typing errors. A good password will contain a mixture of letters, numbers and punctuation, should be at least eight characters long, and should be changed at regular intervals.&lt;/small&gt;</source>
<translation>&lt;small&gt;Внесете същата парола два пъти, за да може да бъде проверена за правописни грешки. Добра парола ще съдържа смесица от букви, цифри и пунктуационни знаци, трябва да бъде поне с осем знака и да бъде променяна често.&lt;/small&gt;</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="226"/>
<source>What is the name of this computer?</source>
<translation>Какво е името на този компютър?</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="309"/>
<source>&lt;small&gt;This name will be used if you make the computer visible to others on a network.&lt;/small&gt;</source>
<translation>&lt;small&gt;Това име ще бъде използвано ако направите компютъра видим за други при мрежа.&lt;/small&gt;</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="450"/>
<source>Log in automatically without asking for the password.</source>
<translation>Влизайте автоматично, без питане за паролата.</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="457"/>
<source>Use the same password for the administrator account.</source>
<translation>Използвайте същата парола за администраторския акаунт.</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="480"/>
<source>Choose a password for the administrator account.</source>
<translation>Изберете парола за администраторския акаунт.</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="585"/>
<source>&lt;small&gt;Enter the same password twice, so that it can be checked for typing errors.&lt;/small&gt;</source>
<translation>&lt;small&gt;Внесете същата парола два пъти, за да може да бъде проверена за правописни грешки.&lt;/small&gt;</translation>
</message>
</context>
<context>
<name>PartitionLabelsView</name>
<message>
<location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="193"/>
<source>Root</source>
<translation>Основен</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="196"/>
<source>Home</source>
<translation>Домашен</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="198"/>
<source>Boot</source>
<translation>Зареждане</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="201"/>
<source>EFI system</source>
<translation>EFI система</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="203"/>
<source>Swap</source>
<translation>Swap</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="205"/>
<source>New partition for %1</source>
<translation>Нов дял за %1</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="207"/>
<source>New partition</source>
<translation>Нов дял</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="224"/>
<source>%1 %2</source>
<translation>%1 %2</translation>
</message>
</context>
<context>
<name>PartitionModel</name>
<message>
<location filename="../src/modules/partition/core/PartitionModel.cpp" line="138"/>
<location filename="../src/modules/partition/core/PartitionModel.cpp" line="170"/>
<source>Free Space</source>
<translation>Свободно пространство</translation>
</message>
<message>
<location filename="../src/modules/partition/core/PartitionModel.cpp" line="142"/>
<location filename="../src/modules/partition/core/PartitionModel.cpp" line="174"/>
<source>New partition</source>
<translation>Нов дял</translation>
</message>
<message>
<location filename="../src/modules/partition/core/PartitionModel.cpp" line="258"/>
<source>Name</source>
<translation>Име</translation>
</message>
<message>
<location filename="../src/modules/partition/core/PartitionModel.cpp" line="260"/>
<source>File System</source>
<translation>Файлова система</translation>
</message>
<message>
<location filename="../src/modules/partition/core/PartitionModel.cpp" line="262"/>
<source>Mount Point</source>
<translation>Точка на монтиране</translation>
</message>
<message>
<location filename="../src/modules/partition/core/PartitionModel.cpp" line="264"/>
<source>Size</source>
<translation>Размер</translation>
</message>
</context>
<context>
<name>PartitionPage</name>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.ui" line="14"/>
<source>Form</source>
<translation>Форма</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.ui" line="22"/>
<source>Storage de&amp;vice:</source>
<translation>Ус&amp;тройство за съхранение&quot;</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.ui" line="51"/>
<source>&amp;Revert All Changes</source>
<translation>&amp;Възвърни всички промени</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.ui" line="87"/>
<source>New Partition &amp;Table</source>
<translation>Нова &amp;таблица на дяловете</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.ui" line="107"/>
<source>Cre&amp;ate</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.ui" line="114"/>
<source>&amp;Edit</source>
<translation>&amp;Редактирай</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.ui" line="121"/>
<source>&amp;Delete</source>
<translation>&amp;Изтрий</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.ui" line="148"/>
<source>Install boot &amp;loader on:</source>
<translation>Инсталирай &amp;устройството за начално зареждане върху:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.cpp" line="171"/>
<source>Are you sure you want to create a new partition table on %1?</source>
<translation>Сигурни ли сте че искате да създадете нова таблица на дяловете върху %1?</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.cpp" line="195"/>
<source>Can not create new partition</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.cpp" line="196"/>
<source>The partition table on %1 already has %2 primary partitions, and no more can be added. Please remove one primary partition and add an extended partition, instead.</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>PartitionViewStep</name>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="71"/>
<source>Gathering system information...</source>
<translation>Събиране на системна информация...</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="122"/>
<source>Partitions</source>
<translation>Дялове</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="159"/>
<source>Install %1 &lt;strong&gt;alongside&lt;/strong&gt; another operating system.</source>
<translation>Инсталирай %1 &lt;strong&gt;заедно&lt;/strong&gt; с друга операционна система.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="163"/>
<source>&lt;strong&gt;Erase&lt;/strong&gt; disk and install %1.</source>
<translation>&lt;strong&gt;Изтрий&lt;/strong&gt; диска и инсталирай %1.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="167"/>
<source>&lt;strong&gt;Replace&lt;/strong&gt; a partition with %1.</source>
<translation>&lt;strong&gt;Замени&lt;/strong&gt; дял с %1.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="172"/>
<source>&lt;strong&gt;Manual&lt;/strong&gt; partitioning.</source>
<translation>&lt;strong&gt;Ръчно&lt;/strong&gt; поделяне.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="185"/>
<source>Install %1 &lt;strong&gt;alongside&lt;/strong&gt; another operating system on disk &lt;strong&gt;%2&lt;/strong&gt; (%3).</source>
<translation>Инсталирай %1 &lt;strong&gt;заедно&lt;/strong&gt; с друга операционна система на диск &lt;strong&gt;%2&lt;/strong&gt; (%3).</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="191"/>
<source>&lt;strong&gt;Erase&lt;/strong&gt; disk &lt;strong&gt;%2&lt;/strong&gt; (%3) and install %1.</source>
<translation>&lt;strong&gt;Изтрий&lt;/strong&gt; диск &lt;strong&gt;%2&lt;/strong&gt; (%3) и инсталирай %1.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="197"/>
<source>&lt;strong&gt;Replace&lt;/strong&gt; a partition on disk &lt;strong&gt;%2&lt;/strong&gt; (%3) with %1.</source>
<translation>&lt;strong&gt;Замени&lt;/strong&gt; дял на диск &lt;strong&gt;%2&lt;/strong&gt; (%3) с %1.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="204"/>
<source>&lt;strong&gt;Manual&lt;/strong&gt; partitioning on disk &lt;strong&gt;%1&lt;/strong&gt; (%2).</source>
<translation>&lt;strong&gt;Ръчно&lt;/strong&gt; поделяне на диск &lt;strong&gt;%1&lt;/strong&gt; (%2).</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="212"/>
<source>Disk &lt;strong&gt;%1&lt;/strong&gt; (%2)</source>
<translation>Диск &lt;strong&gt;%1&lt;/strong&gt; (%2)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="240"/>
<source>Current:</source>
<translation>Сегашен:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="257"/>
<source>After:</source>
<translation>След:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="400"/>
<source>No EFI system partition configured</source>
<translation>Няма конфигуриран EFI системен дял</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="401"/>
<source>An EFI system partition is necessary to start %1.&lt;br/&gt;&lt;br/&gt;To configure an EFI system partition, go back and select or create a FAT32 filesystem with the &lt;strong&gt;esp&lt;/strong&gt; flag enabled and mount point &lt;strong&gt;%2&lt;/strong&gt;.&lt;br/&gt;&lt;br/&gt;You can continue without setting up an EFI system partition but your system may fail to start.</source>
<translation>EFI системен дял е нужен за стартиране на %1.&lt;br/&gt;&lt;br/&gt;За настройка на EFI системен дял се върнете назад и изберете или създайте FAT32 файлова система с включен &lt;strong&gt;esp&lt;/strong&gt; флаг и точка на монтиране &lt;strong&gt;%2&lt;/strong&gt;.&lt;br/&gt;&lt;br/&gt;Може да продължите без EFI системен дял, но системата може да не успее да стартира.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="414"/>
<source>EFI system partition flag not set</source>
<translation>Не е зададен флаг на EFI системен дял</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="415"/>
<source>An EFI system partition is necessary to start %1.&lt;br/&gt;&lt;br/&gt;A partition was configured with mount point &lt;strong&gt;%2&lt;/strong&gt; but its &lt;strong&gt;esp&lt;/strong&gt; flag is not set.&lt;br/&gt;To set the flag, go back and edit the partition.&lt;br/&gt;&lt;br/&gt;You can continue without setting the flag but your system may fail to start.</source>
<translation>EFI системен дял е нужен за стартиране на %1.&lt;br/&gt;&lt;br/&gt;Дялът беше конфигуриран с точка на монтиране &lt;strong&gt;%2&lt;/strong&gt;, но неговия &lt;strong&gt;esp&lt;/strong&gt; флаг не е включен.&lt;br/&gt;За да включите флага се върнете назад и редактирайте дяла.&lt;br/&gt;&lt;br/&gt;Може да продължите без флага, но системата може да не успее да стартира.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="450"/>
<source>Boot partition not encrypted</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="451"/>
<source>A separate boot partition was set up together with an encrypted root partition, but the boot partition is not encrypted.&lt;br/&gt;&lt;br/&gt;There are security concerns with this kind of setup, because important system files are kept on an unencrypted partition.&lt;br/&gt;You may continue if you wish, but filesystem unlocking will happen later during system startup.&lt;br/&gt;To encrypt the boot partition, go back and recreate it, selecting &lt;strong&gt;Encrypt&lt;/strong&gt; in the partition creation window.</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>PlasmaLnfJob</name>
<message>
<location filename="../src/modules/plasmalnf/PlasmaLnfJob.cpp" line="41"/>
<source>Plasma Look-and-Feel Job</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/plasmalnf/PlasmaLnfJob.cpp" line="73"/>
<location filename="../src/modules/plasmalnf/PlasmaLnfJob.cpp" line="74"/>
<source>Could not select KDE Plasma Look-and-Feel package</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>PlasmaLnfPage</name>
<message>
<location filename="../src/modules/plasmalnf/page_plasmalnf.ui" line="14"/>
<source>Form</source>
<translation>Форма</translation>
</message>
<message>
<location filename="../src/modules/plasmalnf/page_plasmalnf.ui" line="20"/>
<source>Placeholder</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/plasmalnf/PlasmaLnfPage.cpp" line="67"/>
<source>Please choose a look-and-feel for the KDE Plasma Desktop. You can also skip this step and configure the look-and-feel once the system is installed. Clicking on a look-and-feel selection will give you a live preview of that look-and-feel.</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>PlasmaLnfViewStep</name>
<message>
<location filename="../src/modules/plasmalnf/PlasmaLnfViewStep.cpp" line="68"/>
<source>Look-and-Feel</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>PreserveFiles</name>
<message>
<location filename="../src/modules/preservefiles/PreserveFiles.cpp" line="83"/>
<source>Saving files for later ...</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/preservefiles/PreserveFiles.cpp" line="89"/>
<source>No files configured to save for later.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/preservefiles/PreserveFiles.cpp" line="145"/>
<source>Not all of the configured files could be preserved.</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>ProcessResult</name>
<message>
<location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="271"/>
<source>
There was no output from the command.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="272"/>
<source>
Output:
</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="275"/>
<source>External command crashed.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="276"/>
<source>Command &lt;i&gt;%1&lt;/i&gt; crashed.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="281"/>
<source>External command failed to start.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="282"/>
<source>Command &lt;i&gt;%1&lt;/i&gt; failed to start.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="286"/>
<source>Internal error when starting command.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="287"/>
<source>Bad parameters for process job call.</source>
<translation>Невалидни параметри за извикване на задача за процес.</translation>
</message>
<message>
<location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="290"/>
<source>External command failed to finish.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="291"/>
<source>Command &lt;i&gt;%1&lt;/i&gt; failed to finish in %2 seconds.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="297"/>
<source>External command finished with errors.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="298"/>
<source>Command &lt;i&gt;%1&lt;/i&gt; finished with exit code %2.</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>QObject</name>
<message>
<location filename="../src/modules/keyboard/keyboardwidget/keyboardglobal.cpp" line="82"/>
<source>Default Keyboard Model</source>
<translation>Модел на клавиатура по подразбиране</translation>
</message>
<message>
<location filename="../src/modules/keyboard/keyboardwidget/keyboardglobal.cpp" line="127"/>
<location filename="../src/modules/keyboard/keyboardwidget/keyboardglobal.cpp" line="163"/>
<source>Default</source>
<translation>По подразбиране</translation>
</message>
<message>
<location filename="../src/modules/partition/core/KPMHelpers.cpp" line="207"/>
<source>unknown</source>
<translation>неизвестна</translation>
</message>
<message>
<location filename="../src/modules/partition/core/KPMHelpers.cpp" line="209"/>
<source>extended</source>
<translation>разширена</translation>
</message>
<message>
<location filename="../src/modules/partition/core/KPMHelpers.cpp" line="211"/>
<source>unformatted</source>
<translation>неформатирана</translation>
</message>
<message>
<location filename="../src/modules/partition/core/KPMHelpers.cpp" line="213"/>
<source>swap</source>
<translation>swap</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="49"/>
<source>Unpartitioned space or unknown partition table</source>
<translation>Неразделено пространство или неизвестна таблица на дяловете</translation>
</message>
</context>
<context>
<name>ReplaceWidget</name>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.ui" line="14"/>
<source>Form</source>
<translation>Форма</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="134"/>
<source>Select where to install %1.&lt;br/&gt;&lt;font color=&quot;red&quot;&gt;Warning: &lt;/font&gt;this will delete all files on the selected partition.</source>
<translation>Изберете къде да инсталирате %1.&lt;br/&gt;&lt;font color=&quot;red&quot;&gt;Предупреждение: &lt;/font&gt;това ще изтрие всички файлове върху избраният дял.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="160"/>
<source>The selected item does not appear to be a valid partition.</source>
<translation>Избраният предмет не изглежда да е валиден дял.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="168"/>
<source>%1 cannot be installed on empty space. Please select an existing partition.</source>
<translation>%1 не може да бъде инсталиран на празно пространство. Моля изберете съществуващ дял.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="178"/>
<source>%1 cannot be installed on an extended partition. Please select an existing primary or logical partition.</source>
<translation>%1 не може да бъде инсталиран върху разширен дял. Моля изберете съществуващ основен или логически дял.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="188"/>
<source>%1 cannot be installed on this partition.</source>
<translation>%1 не може да бъде инсталиран върху този дял.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="194"/>
<source>Data partition (%1)</source>
<translation>Дял на данните (%1)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="211"/>
<source>Unknown system partition (%1)</source>
<translation>Непознат системен дял (%1)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="216"/>
<source>%1 system partition (%2)</source>
<translation>%1 системен дял (%2)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="227"/>
<source>&lt;strong&gt;%4&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;The partition %1 is too small for %2. Please select a partition with capacity at least %3 GiB.</source>
<translation>&lt;strong&gt;%4&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;Дялът %1 е твърде малък за %2. Моля изберете дял с капацитет поне %3 ГБ.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="250"/>
<source>&lt;strong&gt;%2&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1.</source>
<translation>&lt;strong&gt;%2&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;EFI системен дял не е намерен. Моля, опитайте пак като използвате ръчно поделяне за %1.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="261"/>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="278"/>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="302"/>
<source>&lt;strong&gt;%3&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;%1 will be installed on %2.&lt;br/&gt;&lt;font color=&quot;red&quot;&gt;Warning: &lt;/font&gt;all data on partition %2 will be lost.</source>
<translation>&lt;strong&gt;%3&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;%1 ще бъде инсталиран върху %2.&lt;br/&gt;&lt;font color=&quot;red&quot;&gt;Предупреждение: &lt;/font&gt;всички данни на дял %2 ще бъдат изгубени.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="270"/>
<source>The EFI system partition at %1 will be used for starting %2.</source>
<translation>EFI системен дял в %1 ще бъде използван за стартиране на %2.</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="286"/>
<source>EFI system partition:</source>
<translation>EFI системен дял:</translation>
</message>
</context>
<context>
<name>RequirementsChecker</name>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="68"/>
<source>Gathering system information...</source>
<translation>Събиране на системна информация...</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="118"/>
<source>has at least %1 GB available drive space</source>
<translation>има поне %1 ГБ свободено дисково пространство</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="120"/>
<source>There is not enough drive space. At least %1 GB is required.</source>
<translation>Няма достатъчно дисково пространство. Необходимо е поне %1 ГБ.</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="128"/>
<source>has at least %1 GB working memory</source>
<translation>има поне %1 ГБ работна памет</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="130"/>
<source>The system does not have enough working memory. At least %1 GB is required.</source>
<translation>Системата не разполага с достатъчно работна памет. Необходима е поне %1 ГБ.</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="138"/>
<source>is plugged in to a power source</source>
<translation>е включен към източник на захранване</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="139"/>
<source>The system is not plugged in to a power source.</source>
<translation>Системата не е включена към източник на захранване.</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="146"/>
<source>is connected to the Internet</source>
<translation>е свързан към интернет</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="147"/>
<source>The system is not connected to the Internet.</source>
<translation>Системата не е свързана с интернет.</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="155"/>
<source>The installer is not running with administrator rights.</source>
<translation>Инсталаторът не е стартиран с права на администратор.</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="163"/>
<source>The screen is too small to display the installer.</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>ResizePartitionJob</name>
<message>
<location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="48"/>
<source>Resize partition %1.</source>
<translation>Преоразмери дял %1.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="55"/>
<source>Resize &lt;strong&gt;%2MB&lt;/strong&gt; partition &lt;strong&gt;%1&lt;/strong&gt; to &lt;strong&gt;%3MB&lt;/strong&gt;.</source>
<translation>Преоразмери &lt;strong&gt;%2МБ&lt;/strong&gt; дял &lt;strong&gt;%1&lt;/strong&gt; на &lt;strong&gt;%3МБ&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="66"/>
<source>Resizing %2MB partition %1 to %3MB.</source>
<translation>Преоразмеряване от %2МБ дял %1 на %3МБ.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="85"/>
<source>The installer failed to resize partition %1 on disk &apos;%2&apos;.</source>
<translation>Инсталатора не успя да преоразмери дял %1 върху диск &apos;%2&apos;.</translation>
</message>
</context>
<context>
<name>ScanningDialog</name>
<message>
<location filename="../src/modules/partition/gui/ScanningDialog.cpp" line="84"/>
<source>Scanning storage devices...</source>
<translation>Сканиране на устройствата за съхранение</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ScanningDialog.cpp" line="85"/>
<source>Partitioning</source>
<translation>Разделяне</translation>
</message>
</context>
<context>
<name>SetHostNameJob</name>
<message>
<location filename="../src/modules/users/SetHostNameJob.cpp" line="38"/>
<source>Set hostname %1</source>
<translation>Поставете име на хоста %1</translation>
</message>
<message>
<location filename="../src/modules/users/SetHostNameJob.cpp" line="45"/>
<source>Set hostname &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>Поставете име на хост &lt;strong&gt;%1&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/users/SetHostNameJob.cpp" line="52"/>
<source>Setting hostname %1.</source>
<translation>Задаване името на хоста %1</translation>
</message>
<message>
<location filename="../src/modules/users/SetHostNameJob.cpp" line="62"/>
<location filename="../src/modules/users/SetHostNameJob.cpp" line="69"/>
<source>Internal Error</source>
<translation>Вътрешна грешка</translation>
</message>
<message>
<location filename="../src/modules/users/SetHostNameJob.cpp" line="76"/>
<location filename="../src/modules/users/SetHostNameJob.cpp" line="87"/>
<source>Cannot write hostname to target system</source>
<translation>Не може да се запише името на хоста на целевата система</translation>
</message>
</context>
<context>
<name>SetKeyboardLayoutJob</name>
<message>
<location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="59"/>
<source>Set keyboard model to %1, layout to %2-%3</source>
<translation>Постави модела на клавиатурата на %1, оформлението на %2-%3</translation>
</message>
<message>
<location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="318"/>
<source>Failed to write keyboard configuration for the virtual console.</source>
<translation>Неуспешно записването на клавиатурна конфигурация за виртуалната конзола.</translation>
</message>
<message>
<location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="319"/>
<location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="323"/>
<location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="329"/>
<source>Failed to write to %1</source>
<translation>Неуспешно записване върху %1</translation>
</message>
<message>
<location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="322"/>
<source>Failed to write keyboard configuration for X11.</source>
<translation>Неуспешно записване на клавиатурна конфигурация за X11.</translation>
</message>
<message>
<location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="328"/>
<source>Failed to write keyboard configuration to existing /etc/default directory.</source>
<translation>Неуспешно записване на клавиатурна конфигурация в съществуващата директория /etc/default.</translation>
</message>
</context>
<context>
<name>SetPartFlagsJob</name>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="49"/>
<source>Set flags on partition %1.</source>
<translation>Задай флагове на дял %1.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="52"/>
<source>Set flags on %1MB %2 partition.</source>
<translation>Задай флагове на дял %1MB %2.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="56"/>
<source>Set flags on new partition.</source>
<translation>Задай флагове на нов дял.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="67"/>
<source>Clear flags on partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>Изчисти флаговете на дял &lt;strong&gt;%1&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="71"/>
<source>Clear flags on %1MB &lt;strong&gt;%2&lt;/strong&gt; partition.</source>
<translation>Изчисти флагове на дял %1MB &lt;strong&gt;%2&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="75"/>
<source>Clear flags on new partition.</source>
<translation>Изчисти флагове на нов дял.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="79"/>
<source>Flag partition &lt;strong&gt;%1&lt;/strong&gt; as &lt;strong&gt;%2&lt;/strong&gt;.</source>
<translation>Сложи флаг на дял &lt;strong&gt;%1&lt;/strong&gt; като &lt;strong&gt;%2&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="85"/>
<source>Flag %1MB &lt;strong&gt;%2&lt;/strong&gt; partition as &lt;strong&gt;%3&lt;/strong&gt;.</source>
<translation>Сложи флаг на дял %1MB &lt;strong&gt;%2&lt;/strong&gt; като &lt;strong&gt;%3&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="91"/>
<source>Flag new partition as &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>Сложи флаг на новия дял като &lt;strong&gt;%1&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="103"/>
<source>Clearing flags on partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>Изчистване на флаговете на дял &lt;strong&gt;%1&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="107"/>
<source>Clearing flags on %1MB &lt;strong&gt;%2&lt;/strong&gt; partition.</source>
<translation>Изчистване флаговете на дял %1MB &lt;strong&gt;%2&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="111"/>
<source>Clearing flags on new partition.</source>
<translation>Изчистване на флаговете на новия дял.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="115"/>
<source>Setting flags &lt;strong&gt;%2&lt;/strong&gt; on partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>Задаване на флагове &lt;strong&gt;%2&lt;/strong&gt; на дял &lt;strong&gt;%1&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="121"/>
<source>Setting flags &lt;strong&gt;%3&lt;/strong&gt; on %1MB &lt;strong&gt;%2&lt;/strong&gt; partition.</source>
<translation>Задаване на флагове &lt;strong&gt;%3&lt;/strong&gt; на дял %1MB &lt;strong&gt;%2&lt;/strong&gt;.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="127"/>
<source>Setting flags &lt;strong&gt;%1&lt;/strong&gt; on new partition.</source>
<translation>Задаване на флагове &lt;strong&gt;%1&lt;/strong&gt; на новия дял.</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="140"/>
<source>The installer failed to set flags on partition %1.</source>
<translation>Инсталатора не успя да зададе флагове на дял %1.</translation>
</message>
</context>
<context>
<name>SetPasswordJob</name>
<message>
<location filename="../src/modules/users/SetPasswordJob.cpp" line="48"/>
<source>Set password for user %1</source>
<translation>Задай парола за потребител %1</translation>
</message>
<message>
<location filename="../src/modules/users/SetPasswordJob.cpp" line="55"/>
<source>Setting password for user %1.</source>
<translation>Задаване на парола за потребител %1</translation>
</message>
<message>
<location filename="../src/modules/users/SetPasswordJob.cpp" line="112"/>
<source>Bad destination system path.</source>
<translation>Лоша дестинация за системен път.</translation>
</message>
<message>
<location filename="../src/modules/users/SetPasswordJob.cpp" line="113"/>
<source>rootMountPoint is %1</source>
<translation>root точка на монтиране е %1</translation>
</message>
<message>
<location filename="../src/modules/users/SetPasswordJob.cpp" line="123"/>
<source>Cannot disable root account.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/SetPasswordJob.cpp" line="124"/>
<source>passwd terminated with error code %1.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/users/SetPasswordJob.cpp" line="139"/>
<source>Cannot set password for user %1.</source>
<translation>Не може да се постави парола за потребител %1.</translation>
</message>
<message>
<location filename="../src/modules/users/SetPasswordJob.cpp" line="141"/>
<source>usermod terminated with error code %1.</source>
<translation>usermod е прекратен с грешка %1.</translation>
</message>
</context>
<context>
<name>SetTimezoneJob</name>
<message>
<location filename="../src/modules/locale/SetTimezoneJob.cpp" line="43"/>
<source>Set timezone to %1/%2</source>
<translation>Постави часовата зона на %1/%2</translation>
</message>
<message>
<location filename="../src/modules/locale/SetTimezoneJob.cpp" line="71"/>
<source>Cannot access selected timezone path.</source>
<translation>Няма достъп до избрания път за часова зона.</translation>
</message>
<message>
<location filename="../src/modules/locale/SetTimezoneJob.cpp" line="72"/>
<source>Bad path: %1</source>
<translation>Лош път: %1</translation>
</message>
<message>
<location filename="../src/modules/locale/SetTimezoneJob.cpp" line="86"/>
<source>Cannot set timezone.</source>
<translation>Не може да се зададе часова зона.</translation>
</message>
<message>
<location filename="../src/modules/locale/SetTimezoneJob.cpp" line="87"/>
<source>Link creation failed, target: %1; link name: %2</source>
<translation>Неуспешно създаване на връзка: %1; име на връзка: %2</translation>
</message>
<message>
<location filename="../src/modules/locale/SetTimezoneJob.cpp" line="96"/>
<source>Cannot set timezone,</source>
<translation>Не може да се зададе часова зона,</translation>
</message>
<message>
<location filename="../src/modules/locale/SetTimezoneJob.cpp" line="97"/>
<source>Cannot open /etc/timezone for writing</source>
<translation>Не може да се отвори /etc/timezone за записване</translation>
</message>
</context>
<context>
<name>ShellProcessJob</name>
<message>
<location filename="../src/modules/shellprocess/ShellProcessJob.cpp" line="51"/>
<source>Shell Processes Job</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>SlideCounter</name>
<message>
<location filename="../src/qml/calamares/slideshow/SlideCounter.qml" line="36"/>
<source>%L1 / %L2</source>
<extracomment>slide counter, %1 of %2 (numeric)</extracomment>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>SummaryPage</name>
<message>
<location filename="../src/modules/summary/SummaryPage.cpp" line="49"/>
<source>This is an overview of what will happen once you start the install procedure.</source>
<translation>Това е преглед на промените, които ще се извършат, след като започнете процедурата по инсталиране.</translation>
</message>
</context>
<context>
<name>SummaryViewStep</name>
<message>
<location filename="../src/modules/summary/SummaryViewStep.cpp" line="43"/>
<source>Summary</source>
<translation>Обобщение</translation>
</message>
</context>
<context>
<name>TrackingInstallJob</name>
<message>
<location filename="../src/modules/tracking/TrackingJobs.cpp" line="43"/>
<source>Installation feedback</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/tracking/TrackingJobs.cpp" line="53"/>
<source>Sending installation feedback.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/tracking/TrackingJobs.cpp" line="88"/>
<source>Internal error in install-tracking.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/tracking/TrackingJobs.cpp" line="89"/>
<source>HTTP request timed out.</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>TrackingMachineNeonJob</name>
<message>
<location filename="../src/modules/tracking/TrackingJobs.cpp" line="104"/>
<source>Machine feedback</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/tracking/TrackingJobs.cpp" line="114"/>
<source>Configuring machine feedback.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/tracking/TrackingJobs.cpp" line="133"/>
<location filename="../src/modules/tracking/TrackingJobs.cpp" line="136"/>
<source>Error in machine feedback configuration.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/tracking/TrackingJobs.cpp" line="134"/>
<source>Could not configure machine feedback correctly, script error %1.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/tracking/TrackingJobs.cpp" line="137"/>
<source>Could not configure machine feedback correctly, Calamares error %1.</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>TrackingPage</name>
<message>
<location filename="../src/modules/tracking/page_trackingstep.ui" line="14"/>
<source>Form</source>
<translation>Форма</translation>
</message>
<message>
<location filename="../src/modules/tracking/page_trackingstep.ui" line="24"/>
<source>Placeholder</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/tracking/page_trackingstep.ui" line="72"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;By selecting this, you will send &lt;span style=&quot; font-weight:600;&quot;&gt;no information at all&lt;/span&gt; about your installation.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/tracking/page_trackingstep.ui" line="123"/>
<location filename="../src/modules/tracking/page_trackingstep.ui" line="185"/>
<location filename="../src/modules/tracking/page_trackingstep.ui" line="247"/>
<source>TextLabel</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/tracking/page_trackingstep.ui" line="133"/>
<location filename="../src/modules/tracking/page_trackingstep.ui" line="195"/>
<location filename="../src/modules/tracking/page_trackingstep.ui" line="257"/>
<source>...</source>
<translation>...</translation>
</message>
<message>
<location filename="../src/modules/tracking/page_trackingstep.ui" line="271"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;a href=&quot;placeholder&quot;&gt;&lt;span style=&quot; text-decoration: underline; color:#2980b9;&quot;&gt;Click here for more information about user feedback&lt;/span&gt;&lt;/a&gt;&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/tracking/TrackingPage.cpp" line="44"/>
<source>Install tracking helps %1 to see how many users they have, what hardware they install %1 to and (with the last two options below), get continuous information about preferred applications. To see what will be sent, please click the help icon next to each area.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/tracking/TrackingPage.cpp" line="45"/>
<source>By selecting this you will send information about your installation and hardware. This information will &lt;b&gt;only be sent once&lt;/b&gt; after the installation finishes.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/tracking/TrackingPage.cpp" line="46"/>
<source>By selecting this you will &lt;b&gt;periodically&lt;/b&gt; send information about your installation, hardware and applications, to %1.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/tracking/TrackingPage.cpp" line="47"/>
<source>By selecting this you will &lt;b&gt;regularly&lt;/b&gt; send information about your installation, hardware, applications and usage patterns, to %1.</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>TrackingViewStep</name>
<message>
<location filename="../src/modules/tracking/TrackingViewStep.cpp" line="59"/>
<source>Feedback</source>
<translation type="unfinished"/>
</message>
</context>
<context>
<name>UsersPage</name>
<message>
<location filename="../src/modules/users/UsersPage.cpp" line="289"/>
<source>Your username is too long.</source>
<translation>Вашето потребителско име е твърде дълго.</translation>
</message>
<message>
<location filename="../src/modules/users/UsersPage.cpp" line="295"/>
<source>Your username contains invalid characters. Only lowercase letters and numbers are allowed.</source>
<translation>Потребителското ви име съдържа непозволени символи! Само малки букви и числа са позволени.</translation>
</message>
<message>
<location filename="../src/modules/users/UsersPage.cpp" line="333"/>
<source>Your hostname is too short.</source>
<translation>Вашето име на хоста е твърде кратко.</translation>
</message>
<message>
<location filename="../src/modules/users/UsersPage.cpp" line="339"/>
<source>Your hostname is too long.</source>
<translation>Вашето име на хоста е твърде дълго.</translation>
</message>
<message>
<location filename="../src/modules/users/UsersPage.cpp" line="345"/>
<source>Your hostname contains invalid characters. Only letters, numbers and dashes are allowed.</source>
<translation>Вашето име на хоста съдържа непозволени символи! Само букви, цифри и тирета са позволени.</translation>
</message>
<message>
<location filename="../src/modules/users/UsersPage.cpp" line="373"/>
<location filename="../src/modules/users/UsersPage.cpp" line="417"/>
<source>Your passwords do not match!</source>
<translation>Паролите Ви не съвпадат!</translation>
</message>
</context>
<context>
<name>UsersViewStep</name>
<message>
<location filename="../src/modules/users/UsersViewStep.cpp" line="53"/>
<source>Users</source>
<translation>Потребители</translation>
</message>
</context>
<context>
<name>WelcomePage</name>
<message>
<location filename="../src/modules/welcome/WelcomePage.ui" line="14"/>
<source>Form</source>
<translation>Форма</translation>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.ui" line="75"/>
<source>&amp;Language:</source>
<translation>&amp;Език:</translation>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.ui" line="176"/>
<source>&amp;Release notes</source>
<translation>&amp;Бележки по изданието</translation>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.ui" line="166"/>
<source>&amp;Known issues</source>
<translation>&amp;Съществуващи проблеми</translation>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.ui" line="156"/>
<source>&amp;Support</source>
<translation>&amp;Поддръжка</translation>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.ui" line="146"/>
<source>&amp;About</source>
<translation>&amp;Относно</translation>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.cpp" line="60"/>
<source>&lt;h1&gt;Welcome to the %1 installer.&lt;/h1&gt;</source>
<translation>&lt;h1&gt;Добре дошли при инсталатора на %1.&lt;/h1&gt;</translation>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.cpp" line="60"/>
<source>&lt;h1&gt;Welcome to the Calamares installer for %1.&lt;/h1&gt;</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.cpp" line="73"/>
<source>About %1 installer</source>
<translation>Относно инсталатор %1</translation>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.cpp" line="75"/>
<source>&lt;h1&gt;%1&lt;/h1&gt;&lt;br/&gt;&lt;strong&gt;%2&lt;br/&gt;for %3&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;Copyright 2014-2017 Teo Mrnjavac &amp;lt;teo@kde.org&amp;gt;&lt;br/&gt;Copyright 2017 Adriaan de Groot &amp;lt;groot@kde.org&amp;gt;&lt;br/&gt;Thanks to: Anke Boersma, Aurélien Gâteau, Kevin Kofler, Lisa Vitolo, Philip Müller, Pier Luigi Fiorini, Rohan Garg and the &lt;a href=&quot;https://www.transifex.com/calamares/calamares/&quot;&gt;Calamares translators team&lt;/a&gt;.&lt;br/&gt;&lt;br/&gt;&lt;a href=&quot;https://calamares.io/&quot;&gt;Calamares&lt;/a&gt; development is sponsored by &lt;br/&gt;&lt;a href=&quot;http://www.blue-systems.com/&quot;&gt;Blue Systems&lt;/a&gt; - Liberating Software.</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.cpp" line="290"/>
<source>%1 support</source>
<translation>%1 поддръжка</translation>
</message>
</context>
<context>
<name>WelcomeViewStep</name>
<message>
<location filename="../src/modules/welcome/WelcomeViewStep.cpp" line="52"/>
<source>Welcome</source>
<translation>Добре дошли</translation>
</message>
</context>
</TS>