You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

2310 lines
122 KiB
XML

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

<?xml version="1.0" ?><!DOCTYPE TS><TS language="zh_TW" version="2.1">
<context>
<name>BootInfoWidget</name>
<message>
<location filename="../src/modules/partition/gui/BootInfoWidget.cpp" line="69"/>
<source>The &lt;strong&gt;boot environment&lt;/strong&gt; of this system.&lt;br&gt;&lt;br&gt;Older x86 systems only support &lt;strong&gt;BIOS&lt;/strong&gt;.&lt;br&gt;Modern systems usually use &lt;strong&gt;EFI&lt;/strong&gt;, but may also show up as BIOS if started in compatibility mode.</source>
<translation>這個系統的&lt;strong&gt;開機環境&lt;/strong&gt;&lt;br&gt;&lt;br&gt;較舊的 x86 系統只支援 &lt;strong&gt;BIOS&lt;/strong&gt;&lt;br&gt;現代的系統則通常使用 &lt;strong&gt;EFI&lt;/strong&gt;,但若開機環境是以相容模式執行,其也可能顯示為 BIOS。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/BootInfoWidget.cpp" line="79"/>
<source>This system was started with an &lt;strong&gt;EFI&lt;/strong&gt; boot environment.&lt;br&gt;&lt;br&gt;To configure startup from an EFI environment, this installer must deploy a boot loader application, like &lt;strong&gt;GRUB&lt;/strong&gt; or &lt;strong&gt;systemd-boot&lt;/strong&gt; on an &lt;strong&gt;EFI System Partition&lt;/strong&gt;. This is automatic, unless you choose manual partitioning, in which case you must choose it or create it on your own.</source>
<translation>這個系統以 &lt;strong&gt;EFI&lt;/strong&gt; 開機環境啟動。&lt;br&gt;&lt;br&gt;要設定從 EFI 環境開機,本安裝程式必須部署一個開機載入器應用程式,像是 &lt;strong&gt;GRUB&lt;/strong&gt;&lt;strong&gt;systemd-boot&lt;/strong&gt;&lt;strong&gt;EFI 系統分割區&lt;/strong&gt;上。這是自動的,除非您選擇手動分割,在這種情況下,您必須自行選取或建立它。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/BootInfoWidget.cpp" line="91"/>
<source>This system was started with a &lt;strong&gt;BIOS&lt;/strong&gt; boot environment.&lt;br&gt;&lt;br&gt;To configure startup from a BIOS environment, this installer must install a boot loader, like &lt;strong&gt;GRUB&lt;/strong&gt;, either at the beginning of a partition or on the &lt;strong&gt;Master Boot Record&lt;/strong&gt; near the beginning of the partition table (preferred). This is automatic, unless you choose manual partitioning, in which case you must set it up on your own.</source>
<translation>這個系統以 &lt;strong&gt;BIOS&lt;/strong&gt; 開機環境開始。&lt;br&gt;&lt;br&gt;要從 BIOS 環境開機開機,本安裝程式必須安裝開機載入器,像是 &lt;strong&gt;GRUB&lt;/strong&gt;,且通常不是安裝在分割區的開頭就是在靠進分割表開頭的 &lt;strong&gt;主開機記錄&lt;/strong&gt;(推薦)。這是自動的,除非您選擇手動分割,在這種情況下,您必須自行設定它。</translation>
</message>
</context>
<context>
<name>BootLoaderModel</name>
<message>
<location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="59"/>
<source>Master Boot Record of %1</source>
<translation>%1 的主要開機紀錄 (MBR)</translation>
</message>
<message>
<location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="76"/>
<source>Boot Partition</source>
<translation>開機磁區</translation>
</message>
<message>
<location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="81"/>
<source>System Partition</source>
<translation>系統磁區</translation>
</message>
<message>
<location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="111"/>
<source>Do not install a boot loader</source>
<translation>無法安裝開機載入器</translation>
</message>
<message>
<location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="125"/>
<source>%1 (%2)</source>
<translation>%1 (%2)</translation>
</message>
</context>
<context>
<name>Calamares::DebugWindow</name>
<message>
<location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="14"/>
<source>Form</source>
<translation>型式</translation>
</message>
<message>
<location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="24"/>
<source>GlobalStorage</source>
<translation>全域儲存</translation>
</message>
<message>
<location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="34"/>
<source>JobQueue</source>
<translation>工作佇列</translation>
</message>
<message>
<location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="44"/>
<source>Modules</source>
<translation>模組</translation>
</message>
<message>
<location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="57"/>
<source>Type:</source>
<translation>類型:</translation>
</message>
<message>
<location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="64"/>
<location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="78"/>
<source>none</source>
<translation></translation>
</message>
<message>
<location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="71"/>
<source>Interface:</source>
<translation>介面:</translation>
</message>
<message>
<location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="93"/>
<source>Tools</source>
<translation>工具</translation>
</message>
<message>
<location filename="../src/libcalamaresui/utils/DebugWindow.cpp" line="182"/>
<source>Debug information</source>
<translation>除錯資訊</translation>
</message>
</context>
<context>
<name>Calamares::ExecutionViewStep</name>
<message>
<location filename="../src/libcalamaresui/ExecutionViewStep.cpp" line="77"/>
<source>Install</source>
<translation>安裝</translation>
</message>
</context>
<context>
<name>Calamares::JobThread</name>
<message>
<location filename="../src/libcalamares/JobQueue.cpp" line="89"/>
<source>Done</source>
<translation>完成</translation>
</message>
</context>
<context>
<name>Calamares::ProcessJob</name>
<message>
<location filename="../src/libcalamares/ProcessJob.cpp" line="51"/>
<source>Run command %1 %2</source>
<translation>執行命令 %1 %2</translation>
</message>
<message>
<location filename="../src/libcalamares/ProcessJob.cpp" line="60"/>
<source>Running command %1 %2</source>
<translation>正在執行命令 %1 %2</translation>
</message>
<message>
<location filename="../src/libcalamares/ProcessJob.cpp" line="89"/>
<source>External command crashed</source>
<translation>外部指令崩潰</translation>
</message>
<message>
<location filename="../src/libcalamares/ProcessJob.cpp" line="90"/>
<source>Command %1 crashed.
Output:
%2</source>
<translation>指令 %1 崩潰。
輸出:
%2</translation>
</message>
<message>
<location filename="../src/libcalamares/ProcessJob.cpp" line="95"/>
<source>External command failed to start</source>
<translation>無法開始外部指令</translation>
</message>
<message>
<location filename="../src/libcalamares/ProcessJob.cpp" line="96"/>
<source>Command %1 failed to start.</source>
<translation>無法開始指令 %1</translation>
</message>
<message>
<location filename="../src/libcalamares/ProcessJob.cpp" line="100"/>
<source>Internal error when starting command</source>
<translation>開始指令時發生內部錯誤</translation>
</message>
<message>
<location filename="../src/libcalamares/ProcessJob.cpp" line="101"/>
<source>Bad parameters for process job call.</source>
<translation>呼叫程序的參數無效。</translation>
</message>
<message>
<location filename="../src/libcalamares/ProcessJob.cpp" line="104"/>
<source>External command failed to finish</source>
<translation>無法完成外部指令</translation>
</message>
<message>
<location filename="../src/libcalamares/ProcessJob.cpp" line="105"/>
<source>Command %1 failed to finish in %2s.
Output:
%3</source>
<translation>指令 %1 無法在 %2 秒內完成。
輸出:
%3</translation>
</message>
<message>
<location filename="../src/libcalamares/ProcessJob.cpp" line="111"/>
<source>External command finished with errors</source>
<translation>外部指令以錯誤方式完成</translation>
</message>
<message>
<location filename="../src/libcalamares/ProcessJob.cpp" line="112"/>
<source>Command %1 finished with exit code %2.
Output:
%3</source>
<translation>指令 %1 以退出狀態 %2 完成。
輸出:
%3</translation>
</message>
</context>
<context>
<name>Calamares::PythonJob</name>
<message>
<location filename="../src/libcalamares/PythonJob.cpp" line="265"/>
<source>Running %1 operation.</source>
<translation>正在執行 %1 操作。</translation>
</message>
<message>
<location filename="../src/libcalamares/PythonJob.cpp" line="280"/>
<source>Bad working directory path</source>
<translation>不良的工作目錄路徑</translation>
</message>
<message>
<location filename="../src/libcalamares/PythonJob.cpp" line="281"/>
<source>Working directory %1 for python job %2 is not readable.</source>
<translation>Python 行程 %2 作用中的目錄 %1 不具讀取權限。</translation>
</message>
<message>
<location filename="../src/libcalamares/PythonJob.cpp" line="291"/>
<source>Bad main script file</source>
<translation>錯誤的主要腳本檔</translation>
</message>
<message>
<location filename="../src/libcalamares/PythonJob.cpp" line="292"/>
<source>Main script file %1 for python job %2 is not readable.</source>
<translation>Python 行程 %2 的主要腳本檔 %1 無法讀取。</translation>
</message>
<message>
<location filename="../src/libcalamares/PythonJob.cpp" line="368"/>
<source>Boost.Python error in job &quot;%1&quot;.</source>
<translation>行程 %1 中 Boost.Python 錯誤。</translation>
</message>
</context>
<context>
<name>Calamares::ViewManager</name>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="73"/>
<source>&amp;Back</source>
<translation>返回 (&amp;B)</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="74"/>
<source>&amp;Next</source>
<translation>下一步 (&amp;N)</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="75"/>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="300"/>
<source>&amp;Cancel</source>
<translation>取消(&amp;C)</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="76"/>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="301"/>
<source>Cancel installation without changing the system.</source>
<translation>不變更系統並取消安裝。</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="99"/>
<source>Cancel installation?</source>
<translation>取消安裝?</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="100"/>
<source>Do you really want to cancel the current install process?
The installer will quit and all changes will be lost.</source>
<translation>您真的想要取消目前的安裝程序嗎?
安裝程式將會退出且所有變動將會遺失。</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="105"/>
<source>&amp;Yes</source>
<translation>是(&amp;Y)</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="106"/>
<source>&amp;No</source>
<translation>否(&amp;N)</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="183"/>
<source>&amp;Close</source>
<translation>關閉(&amp;C)</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="233"/>
<source>Continue with setup?</source>
<translation>繼續安裝?</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="234"/>
<source>The %1 installer is about to make changes to your disk in order to install %2.&lt;br/&gt;&lt;strong&gt;You will not be able to undo these changes.&lt;/strong&gt;</source>
<translation>%1 安裝程式將在您的磁碟上做出變更以安裝 %2。&lt;br/&gt;&lt;strong&gt;您將無法復原這些變更。&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="239"/>
<source>&amp;Install now</source>
<translation>現在安裝 (&amp;I)</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="240"/>
<source>Go &amp;back</source>
<translation>上一步 (&amp;B)</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="269"/>
<source>&amp;Done</source>
<translation>完成(&amp;D)</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="270"/>
<source>The installation is complete. Close the installer.</source>
<translation>安裝完成。關閉安裝程式。</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="180"/>
<source>Error</source>
<translation>錯誤</translation>
</message>
<message>
<location filename="../src/libcalamaresui/ViewManager.cpp" line="181"/>
<source>Installation Failed</source>
<translation>安裝失敗</translation>
</message>
</context>
<context>
<name>CalamaresPython::Helper</name>
<message>
<location filename="../src/libcalamares/PythonHelper.cpp" line="263"/>
<source>Unknown exception type</source>
<translation>未知的例外型別</translation>
</message>
<message>
<location filename="../src/libcalamares/PythonHelper.cpp" line="276"/>
<source>unparseable Python error</source>
<translation>無法解析的 Python 錯誤</translation>
</message>
<message>
<location filename="../src/libcalamares/PythonHelper.cpp" line="292"/>
<source>unparseable Python traceback</source>
<translation>無法解析的 Python 回溯紀錄</translation>
</message>
<message>
<location filename="../src/libcalamares/PythonHelper.cpp" line="296"/>
<source>Unfetchable Python error.</source>
<translation>無法讀取的 Python 錯誤。</translation>
</message>
</context>
<context>
<name>CalamaresWindow</name>
<message>
<location filename="../src/calamares/CalamaresWindow.cpp" line="45"/>
<source>%1 Installer</source>
<translation>%1 安裝程式</translation>
</message>
<message>
<location filename="../src/calamares/CalamaresWindow.cpp" line="112"/>
<source>Show debug information</source>
<translation>顯示除錯資訊</translation>
</message>
</context>
<context>
<name>CheckFileSystemJob</name>
<message>
<location filename="../src/modules/partition/jobs/CheckFileSystemJob.cpp" line="39"/>
<source>Checking file system on partition %1.</source>
<translation>正在檢查分割區 %1 上的檔案系統。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/CheckFileSystemJob.cpp" line="77"/>
<source>The file system check on partition %1 failed.</source>
<translation>在分割區 %1 上的檔案系統檢查失敗。</translation>
</message>
</context>
<context>
<name>CheckerWidget</name>
<message>
<location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="96"/>
<source>This computer does not satisfy the minimum requirements for installing %1.&lt;br/&gt;Installation cannot continue. &lt;a href=&quot;#details&quot;&gt;Details...&lt;/a&gt;</source>
<translation>此電腦未滿足安裝 %1 的最低配備。&lt;br/&gt;安裝無法繼續。&lt;a href=&quot;#details&quot;&gt;詳細資訊...&lt;/a&gt;</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="113"/>
<source>This computer does not satisfy some of the recommended requirements for installing %1.&lt;br/&gt;Installation can continue, but some features might be disabled.</source>
<translation>此電腦未滿足一些安裝 %1 的推薦需求。&lt;br/&gt;安裝可以繼續,但部份功能可能會被停用。</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="151"/>
<source>This program will ask you some questions and set up %2 on your computer.</source>
<translation>本程式將會問您一些問題並在您的電腦上安裝及設定 %2 。</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="174"/>
<source>For best results, please ensure that this computer:</source>
<translation>為了得到最佳的結果,請確保此電腦:</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="202"/>
<source>System requirements</source>
<translation>系統需求</translation>
</message>
</context>
<context>
<name>ChoicePage</name>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.ui" line="14"/>
<source>Form</source>
<translation>表單</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="128"/>
<source>After:</source>
<translation>之後:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="235"/>
<source>&lt;strong&gt;Manual partitioning&lt;/strong&gt;&lt;br/&gt;You can create or resize partitions yourself.</source>
<translation>&lt;strong&gt;手動分割&lt;/strong&gt;&lt;br/&gt;您可以自行建立或重新調整分割區大小。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="978"/>
<source>Boot loader location:</source>
<translation>開機載入器位置:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="922"/>
<source>%1 will be shrunk to %2MB and a new %3MB partition will be created for %4.</source>
<translation>%1 將會被縮減容量到 %2MB 而一個新的 %3MB 分割區將會被建立為 %4。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="126"/>
<source>Select storage de&amp;vice:</source>
<translation>選取儲存裝置(&amp;V)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="127"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="904"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="950"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1029"/>
<source>Current:</source>
<translation>目前:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="775"/>
<source>Reuse %1 as home partition for %2.</source>
<translation>重新使用 %1 作為 %2 的家目錄分割區。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="905"/>
<source>&lt;strong&gt;Select a partition to shrink, then drag the bottom bar to resize&lt;/strong&gt;</source>
<translation>&lt;strong&gt;選取要縮減的分割區,然後拖曳底部條狀物來調整大小&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1020"/>
<source>&lt;strong&gt;Select a partition to install on&lt;/strong&gt;</source>
<translation>&lt;strong&gt;選取分割區以安裝在其上&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1076"/>
<source>An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1.</source>
<translation>在這個系統上找不到任何的 EFI 系統分割區。請回到上一步並使用手動分割以設定 %1。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1085"/>
<source>The EFI system partition at %1 will be used for starting %2.</source>
<translation>在 %1 的 EFI 系統分割區將會在開始 %2 時使用。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1093"/>
<source>EFI system partition:</source>
<translation>EFI 系統分割區:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1177"/>
<source>This storage device does not seem to have an operating system on it. What would you like to do?&lt;br/&gt;You will be able to review and confirm your choices before any change is made to the storage device.</source>
<translation>這個儲存裝置上似乎還沒有作業系統。您想要怎麼做?&lt;br/&gt;在任何變更套用到儲存裝置上前,您都可以重新檢視並確認您的選擇。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1182"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1219"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1241"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1265"/>
<source>&lt;strong&gt;Erase disk&lt;/strong&gt;&lt;br/&gt;This will &lt;font color=&quot;red&quot;&gt;delete&lt;/font&gt; all data currently present on the selected storage device.</source>
<translation>&lt;strong&gt;抹除磁碟&lt;/strong&gt;&lt;br/&gt;這將會&lt;font color=&quot;red&quot;&gt;刪除&lt;/font&gt;目前選取的儲存裝置上所有的資料。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1209"/>
<source>This storage device has %1 on it. What would you like to do?&lt;br/&gt;You will be able to review and confirm your choices before any change is made to the storage device.</source>
<translation>這個儲存裝置上已經有 %1 了。您想要怎麼做?&lt;br/&gt;在任何變更套用到儲存裝置上前,您都可以重新檢視並確認您的選擇。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1186"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1215"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1237"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1261"/>
<source>&lt;strong&gt;Install alongside&lt;/strong&gt;&lt;br/&gt;The installer will shrink a partition to make room for %1.</source>
<translation>&lt;strong&gt;並存安裝&lt;/strong&gt;&lt;br/&gt;安裝程式將會縮減一個分割區以讓出空間給 %1。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1190"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1224"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1245"/>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1269"/>
<source>&lt;strong&gt;Replace a partition&lt;/strong&gt;&lt;br/&gt;Replaces a partition with %1.</source>
<translation>&lt;strong&gt;取代一個分割區&lt;/strong&gt;&lt;br/&gt;用 %1 取代一個分割區。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1232"/>
<source>This storage device already has an operating system on it. What would you like to do?&lt;br/&gt;You will be able to review and confirm your choices before any change is made to the storage device.</source>
<translation>這個儲存裝置上已經有一個作業系統了。您想要怎麼做?&lt;br/&gt;在任何變更套用到儲存裝置上前,您都可以重新檢視並確認您的選擇。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1256"/>
<source>This storage device has multiple operating systems on it. What would you like to do?&lt;br/&gt;You will be able to review and confirm your choices before any change is made to the storage device.</source>
<translation>這個儲存裝置上已經有多個作業系統了。您想要怎麼做?&lt;br/&gt;在任何變更套用到儲存裝置上前,您都可以重新檢視並確認您的選擇。</translation>
</message>
</context>
<context>
<name>ClearMountsJob</name>
<message>
<location filename="../src/modules/partition/jobs/ClearMountsJob.cpp" line="45"/>
<source>Clear mounts for partitioning operations on %1</source>
<translation>為了準備分割區操作而完全卸載 %1</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ClearMountsJob.cpp" line="53"/>
<source>Clearing mounts for partitioning operations on %1.</source>
<translation>正在為了準備分割區操作而完全卸載 %1</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ClearMountsJob.cpp" line="190"/>
<source>Cleared all mounts for %1</source>
<translation>已清除所有與 %1 相關的掛載</translation>
</message>
</context>
<context>
<name>ClearTempMountsJob</name>
<message>
<location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="42"/>
<source>Clear all temporary mounts.</source>
<translation>清除所有暫時掛載。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="49"/>
<source>Clearing all temporary mounts.</source>
<translation>正在清除所有暫時掛載。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="60"/>
<source>Cannot get list of temporary mounts.</source>
<translation>無法取得暫時掛載的列表。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="99"/>
<source>Cleared all temporary mounts.</source>
<translation>已清除所有暫時掛載。</translation>
</message>
</context>
<context>
<name>CreatePartitionDialog</name>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="14"/>
<source>Create a Partition</source>
<translation>建立一個分割區</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="48"/>
<source> MiB</source>
<translation> MiB</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="55"/>
<source>Partition &amp;Type:</source>
<translation>分割區與類型 (&amp;T)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="67"/>
<source>&amp;Primary</source>
<translation>主要分割區 (&amp;P)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="77"/>
<source>E&amp;xtended</source>
<translation>延伸分割區 (&amp;x)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="119"/>
<source>Fi&amp;le System:</source>
<translation>檔案系統 (&amp;I)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="178"/>
<source>Flags:</source>
<translation>旗標:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="151"/>
<source>&amp;Mount Point:</source>
<translation>掛載點 (&amp;M)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="38"/>
<source>Si&amp;ze:</source>
<translation>容量大小 (&amp;z) </translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="66"/>
<source>En&amp;crypt</source>
<translation>加密(&amp;C)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="162"/>
<source>Logical</source>
<translation>邏輯磁區</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="167"/>
<source>Primary</source>
<translation>主要磁區</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="184"/>
<source>GPT</source>
<translation>GPT</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="269"/>
<source>Mountpoint already in use. Please select another one.</source>
<translation>掛載點使用中。請選擇其他的。</translation>
</message>
</context>
<context>
<name>CreatePartitionJob</name>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="50"/>
<source>Create new %2MB partition on %4 (%3) with file system %1.</source>
<translation>以 %1 檔案系統在 %4 (%3) 上建立新的 %2MB 分割區。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="61"/>
<source>Create new &lt;strong&gt;%2MB&lt;/strong&gt; partition on &lt;strong&gt;%4&lt;/strong&gt; (%3) with file system &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>&lt;strong&gt;%1&lt;/strong&gt; 檔案系統在 &lt;strong&gt;%4&lt;/strong&gt; (%3) 上建立新的 &lt;strong&gt;%2MB&lt;/strong&gt; 分割區。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="73"/>
<source>Creating new %1 partition on %2.</source>
<translation>正在 %2 上建立新的 %1 分割區。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="85"/>
<source>The installer failed to create partition on disk &apos;%1&apos;.</source>
<translation>安裝程式在磁碟 &apos;%1&apos; 上建立分割區失敗。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="94"/>
<source>Could not open device &apos;%1&apos;.</source>
<translation>無法開啟裝置 &apos;%1&apos;</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="104"/>
<source>Could not open partition table.</source>
<translation>無法開啟分割區表格。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="128"/>
<source>The installer failed to create file system on partition %1.</source>
<translation>安裝程式在分割區 %1 上建立檔案系統失敗。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="136"/>
<source>The installer failed to update partition table on disk &apos;%1&apos;.</source>
<translation>安裝程式在磁碟 &apos;%1&apos; 上更新分割區表格失敗。</translation>
</message>
</context>
<context>
<name>CreatePartitionTableDialog</name>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="20"/>
<source>Create Partition Table</source>
<translation>建立分割區表格</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="39"/>
<source>Creating a new partition table will delete all existing data on the disk.</source>
<translation>新增一個分割區表格將會刪除硬碟上所有已存在的資料</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="65"/>
<source>What kind of partition table do you want to create?</source>
<translation>您想要建立哪一種分割區表格?</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="72"/>
<source>Master Boot Record (MBR)</source>
<translation>主要開機紀錄 (MBR)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="82"/>
<source>GUID Partition Table (GPT)</source>
<translation>GUID 分割區表格 (GPT)</translation>
</message>
</context>
<context>
<name>CreatePartitionTableJob</name>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="50"/>
<source>Create new %1 partition table on %2.</source>
<translation>在 %2 上建立新的 %1 分割表。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="57"/>
<source>Create new &lt;strong&gt;%1&lt;/strong&gt; partition table on &lt;strong&gt;%2&lt;/strong&gt; (%3).</source>
<translation>&lt;strong&gt;%2&lt;/strong&gt; (%3) 上建立新的 &lt;strong&gt;%1&lt;/strong&gt; 分割表。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="67"/>
<source>Creating new %1 partition table on %2.</source>
<translation>正在 %2 上建立新的 %1 分割表。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="77"/>
<source>The installer failed to create a partition table on %1.</source>
<translation>安裝程式在 %1 上建立分割區表格失敗。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="85"/>
<source>Could not open device %1.</source>
<translation>無法開啟裝置 %1 。</translation>
</message>
</context>
<context>
<name>CreateUserJob</name>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="50"/>
<source>Create user %1</source>
<translation>建立使用者 %1</translation>
</message>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="57"/>
<source>Create user &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>建立使用者 &lt;strong&gt;%1&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="64"/>
<source>Creating user %1.</source>
<translation>正在建立使用者 %1。</translation>
</message>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="80"/>
<source>Sudoers dir is not writable.</source>
<translation>Sudoers 目錄不可寫入。</translation>
</message>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="84"/>
<source>Cannot create sudoers file for writing.</source>
<translation>無法建立要寫入的 sudoers 檔案。</translation>
</message>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="92"/>
<source>Cannot chmod sudoers file.</source>
<translation>無法修改 sudoers 檔案權限。</translation>
</message>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="98"/>
<source>Cannot open groups file for reading.</source>
<translation>無法開啟要讀取的 groups 檔案。</translation>
</message>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="159"/>
<source>Cannot create user %1.</source>
<translation>無法建立使用者 %1 。</translation>
</message>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="161"/>
<source>useradd terminated with error code %1.</source>
<translation>useradd 以錯誤代碼 %1 終止。</translation>
</message>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="170"/>
<source>Cannot add user %1 to groups: %2.</source>
<translation>無法將使用者 %1 加入至群組:%2。</translation>
</message>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="173"/>
<source>usermod terminated with error code %1.</source>
<translation>usermod 以錯誤代碼 %1 終止。</translation>
</message>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="183"/>
<source>Cannot set home directory ownership for user %1.</source>
<translation>無法將使用者 %1 設定為家目錄的擁有者。</translation>
</message>
<message>
<location filename="../src/modules/users/CreateUserJob.cpp" line="185"/>
<source>chown terminated with error code %1.</source>
<translation>chown 以錯誤代碼 %1 終止。</translation>
</message>
</context>
<context>
<name>DeletePartitionJob</name>
<message>
<location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="43"/>
<source>Delete partition %1.</source>
<translation>刪除分割區 %1。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="51"/>
<source>Delete partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>刪除分割區 &lt;strong&gt;%1&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="59"/>
<source>Deleting partition %1.</source>
<translation>正在刪除分割區 %1。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="68"/>
<source>The installer failed to delete partition %1.</source>
<translation>安裝程式刪除分割區 %1 失敗。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="74"/>
<source>Partition (%1) and device (%2) do not match.</source>
<translation>分割區 (%1) 及裝置 (%2) 不符合。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="86"/>
<source>Could not open device %1.</source>
<translation>無法開啟裝置 %1 。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="95"/>
<source>Could not open partition table.</source>
<translation>無法開啟分割區表格。</translation>
</message>
</context>
<context>
<name>DeviceInfoWidget</name>
<message>
<location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="150"/>
<source>The type of &lt;strong&gt;partition table&lt;/strong&gt; on the selected storage device.&lt;br&gt;&lt;br&gt;The only way to change the partition table type is to erase and recreate the partition table from scratch, which destroys all data on the storage device.&lt;br&gt;This installer will keep the current partition table unless you explicitly choose otherwise.&lt;br&gt;If unsure, on modern systems GPT is preferred.</source>
<translation>選定的儲存裝置上的&lt;strong&gt;分割表&lt;/strong&gt;類型。&lt;br&gt;&lt;br&gt;變更分割表的唯一方法就是抹除再重新從頭建立分割表,這會破壞在該儲存裝置上所有的資料。&lt;br&gt;除非您特別選擇,否則本安裝程式將會保留目前的分割表。&lt;br&gt;若不確定,在現代的系統上,建議使用 GPT。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="107"/>
<source>This device has a &lt;strong&gt;%1&lt;/strong&gt; partition table.</source>
<translation>此裝置已有一個 &lt;strong&gt;%1&lt;/strong&gt; 分割表了。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="114"/>
<source>This is a &lt;strong&gt;loop&lt;/strong&gt; device.&lt;br&gt;&lt;br&gt;It is a pseudo-device with no partition table that makes a file accessible as a block device. This kind of setup usually only contains a single filesystem.</source>
<translation>這是一個 &lt;strong&gt;迴圈&lt;/strong&gt; 裝置。&lt;br&gt;&lt;br&gt;它是一個沒有分割表,但讓檔案可以被像塊裝置一樣存取的偽裝置。此種設定通常只包含一個單一的檔案系統。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="121"/>
<source>This installer &lt;strong&gt;cannot detect a partition table&lt;/strong&gt; on the selected storage device.&lt;br&gt;&lt;br&gt;The device either has no partition table, or the partition table is corrupted or of an unknown type.&lt;br&gt;This installer can create a new partition table for you, either automatically, or through the manual partitioning page.</source>
<translation>本安裝程式在選定的儲存裝置上&lt;strong&gt;偵測不到分割表&lt;/strong&gt;&lt;br&gt;&lt;br&gt;此裝置要不是沒有分割表,就是其分割表已毀損又或者是一個未知類型的分割表。&lt;br&gt;本安裝程式將會為您建立一個新的分割表,不論是自動或是透過手動分割頁面。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="131"/>
<source>&lt;br&gt;&lt;br&gt;This is the recommended partition table type for modern systems which start from an &lt;strong&gt;EFI&lt;/strong&gt; boot environment.</source>
<translation>&lt;br&gt;&lt;br&gt;這是對 &lt;strong&gt;EFI&lt;/strong&gt; 開機環境而言的現代系統建議分割表類型。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="137"/>
<source>&lt;br&gt;&lt;br&gt;This partition table type is only advisable on older systems which start from a &lt;strong&gt;BIOS&lt;/strong&gt; boot environment. GPT is recommended in most other cases.&lt;br&gt;&lt;br&gt;&lt;strong&gt;Warning:&lt;/strong&gt; the MBR partition table is an obsolete MS-DOS era standard.&lt;br&gt;Only 4 &lt;em&gt;primary&lt;/em&gt; partitions may be created, and of those 4, one can be an &lt;em&gt;extended&lt;/em&gt; partition, which may in turn contain many &lt;em&gt;logical&lt;/em&gt; partitions.</source>
<translation>&lt;br&gt;&lt;br&gt;這個分割表類型只被建議在從 &lt;strong&gt;BIOS&lt;/strong&gt; 開機環境啟動的較舊系統上使用。其他大多數情況建議使用 GPT。&lt;br&gt;&lt;strong&gt;警告:&lt;/strong&gt;MBR 分割表是一個被棄用的 MS-DOS 時代的標準。&lt;br&gt;只能有 4 個&lt;em&gt;主要&lt;/em&gt;分割區被建立,其中一個可以是&lt;em&gt;延伸&lt;/em&gt;分割區,其可以包含許多&lt;em&gt;邏輯&lt;/em&gt;分割區。</translation>
</message>
</context>
<context>
<name>DeviceModel</name>
<message>
<location filename="../src/modules/partition/core/DeviceModel.cpp" line="80"/>
<source>%1 - %2 (%3)</source>
<translation>%1 - %2 (%3)</translation>
</message>
</context>
<context>
<name>DracutLuksCfgJob</name>
<message>
<location filename="../src/modules/dracutlukscfg/DracutLuksCfgJob.cpp" line="131"/>
<source>Write LUKS configuration for Dracut to %1</source>
<translation>為 Dracut 寫入 LUKS 設定到 %1</translation>
</message>
<message>
<location filename="../src/modules/dracutlukscfg/DracutLuksCfgJob.cpp" line="133"/>
<source>Skip writing LUKS configuration for Dracut: &quot;/&quot; partition is not encrypted</source>
<translation>跳過為 Dracut 寫入 LUKS 設定:&quot;/&quot; 分割區未加密</translation>
</message>
<message>
<location filename="../src/modules/dracutlukscfg/DracutLuksCfgJob.cpp" line="149"/>
<source>Failed to open %1</source>
<translation>開啟 %1 失敗</translation>
</message>
</context>
<context>
<name>DummyCppJob</name>
<message>
<location filename="../src/modules/dummycpp/DummyCppJob.cpp" line="46"/>
<source>Dummy C++ Job</source>
<translation>虛設 C++ 排程</translation>
</message>
</context>
<context>
<name>EditExistingPartitionDialog</name>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="20"/>
<source>Edit Existing Partition</source>
<translation>編輯已經存在的分割區</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="50"/>
<source>Content:</source>
<translation>內容:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="60"/>
<source>&amp;Keep</source>
<translation>保持(&amp;K)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="70"/>
<source>Format</source>
<translation>格式化</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="89"/>
<source>Warning: Formatting the partition will erase all existing data.</source>
<translation>警告:格式化該分割區換抹除所有已存在的資料。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="99"/>
<source>&amp;Mount Point:</source>
<translation>掛載點 (&amp;M)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="119"/>
<source>Si&amp;ze:</source>
<translation>容量大小 (&amp;Z) </translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="129"/>
<source> MiB</source>
<translation> MiB</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="136"/>
<source>Fi&amp;le System:</source>
<translation>檔案系統 (&amp;I)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="149"/>
<source>Flags:</source>
<translation>旗標:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EditExistingPartitionDialog.cpp" line="307"/>
<source>Mountpoint already in use. Please select another one.</source>
<translation>掛載點使用中。請選擇其他的。</translation>
</message>
</context>
<context>
<name>EncryptWidget</name>
<message>
<location filename="../src/modules/partition/gui/EncryptWidget.ui" line="14"/>
<source>Form</source>
<translation>形式</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EncryptWidget.ui" line="32"/>
<source>En&amp;crypt system</source>
<translation>加密系統(&amp;C)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EncryptWidget.ui" line="42"/>
<source>Passphrase</source>
<translation>通關密語</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EncryptWidget.ui" line="52"/>
<source>Confirm passphrase</source>
<translation>確認通關密語</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/EncryptWidget.cpp" line="151"/>
<source>Please enter the same passphrase in both boxes.</source>
<translation>請在兩個框框中輸入相同的通關密語。</translation>
</message>
</context>
<context>
<name>FillGlobalStorageJob</name>
<message>
<location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="167"/>
<source>Set partition information</source>
<translation>設定分割區資訊</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="191"/>
<source>Install %1 on &lt;strong&gt;new&lt;/strong&gt; %2 system partition.</source>
<translation>&lt;strong&gt;新的&lt;/strong&gt;系統分割區 %2 上安裝 %1。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="195"/>
<source>Set up &lt;strong&gt;new&lt;/strong&gt; %2 partition with mount point &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>設定 &lt;strong&gt;新的&lt;/strong&gt; 不含掛載點 &lt;strong&gt;%1&lt;/strong&gt; 的 %2 分割區。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="203"/>
<source>Install %2 on %3 system partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>在 %3 系統分割區 &lt;strong&gt;%1&lt;/strong&gt; 上安裝 %2。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="208"/>
<source>Set up %3 partition &lt;strong&gt;%1&lt;/strong&gt; with mount point &lt;strong&gt;%2&lt;/strong&gt;.</source>
<translation>為分割區 %3 &lt;strong&gt;%1&lt;/strong&gt; 設定掛載點 &lt;strong&gt;%2&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="220"/>
<source>Install boot loader on &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>安裝開機載入器於 &lt;strong&gt;%1&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="230"/>
<source>Setting up mount points.</source>
<translation>正在設定掛載點。</translation>
</message>
</context>
<context>
<name>FinishedPage</name>
<message>
<location filename="../src/modules/finished/FinishedPage.ui" line="14"/>
<source>Form</source>
<translation>型式</translation>
</message>
<message>
<location filename="../src/modules/finished/FinishedPage.ui" line="77"/>
<source>&amp;Restart now</source>
<translation>現在重新啟動 (&amp;R)</translation>
</message>
<message>
<location filename="../src/modules/finished/FinishedPage.cpp" line="52"/>
<source>&lt;h1&gt;All done.&lt;/h1&gt;&lt;br/&gt;%1 has been installed on your computer.&lt;br/&gt;You may now restart into your new system, or continue using the %2 Live environment.</source>
<translation>&lt;h1&gt;都完成了。&lt;/h1&gt;&lt;br/&gt;%1 已經安裝在您的電腦上了。&lt;br/&gt;您現在可能會想要重新啟動到您的新系統中,或是繼續使用 %2 Live 環境。</translation>
</message>
<message>
<location filename="../src/modules/finished/FinishedPage.cpp" line="110"/>
<source>&lt;h1&gt;Installation Failed&lt;/h1&gt;&lt;br/&gt;%1 has not been installed on your computer.&lt;br/&gt;The error message was: %2.</source>
<translation>&lt;h1&gt;安裝失敗&lt;/h1&gt;&lt;br/&gt;%1 並未安裝到您的電腦上。&lt;br/&gt;錯誤訊息為:%2。</translation>
</message>
</context>
<context>
<name>FinishedViewStep</name>
<message>
<location filename="../src/modules/finished/FinishedViewStep.cpp" line="59"/>
<source>Finish</source>
<translation>完成</translation>
</message>
<message>
<location filename="../src/modules/finished/FinishedViewStep.cpp" line="124"/>
<source>Installation Complete</source>
<translation>安裝完成</translation>
</message>
<message>
<location filename="../src/modules/finished/FinishedViewStep.cpp" line="125"/>
<source>The installation of %1 is complete.</source>
<translation>%1 的安裝已完成。</translation>
</message>
</context>
<context>
<name>FormatPartitionJob</name>
<message>
<location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="49"/>
<source>Format partition %1 (file system: %2, size: %3 MB) on %4.</source>
<translation>格式化在 %4 的分割區 %1 (檔案系統: %2 ,大小: %3 MB</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="60"/>
<source>Format &lt;strong&gt;%3MB&lt;/strong&gt; partition &lt;strong&gt;%1&lt;/strong&gt; with file system &lt;strong&gt;%2&lt;/strong&gt;.</source>
<translation>以檔案系統 &lt;strong&gt;%2&lt;/strong&gt; 格式化 &lt;strong&gt;%3MB&lt;/strong&gt; 的分割區 &lt;strong&gt;%1&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="71"/>
<source>Formatting partition %1 with file system %2.</source>
<translation>正在以 %2 檔案系統格式化分割區 %1。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="83"/>
<source>The installer failed to format partition %1 on disk &apos;%2&apos;.</source>
<translation>安裝程式格式化在磁碟 &apos;%2&apos; 上的分割區 %1 失敗。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="91"/>
<source>Could not open device &apos;%1&apos;.</source>
<translation>無法開啟裝置 &apos;%1&apos;</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="100"/>
<source>Could not open partition table.</source>
<translation>無法開啟分割區表格。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="124"/>
<source>The installer failed to create file system on partition %1.</source>
<translation>安裝程式在分割區 %1 上建立檔案系統失敗。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="133"/>
<source>The installer failed to update partition table on disk &apos;%1&apos;.</source>
<translation>安裝程式在磁碟 &apos;%1&apos; 上更新分割區表格失敗。</translation>
</message>
</context>
<context>
<name>InteractiveTerminalPage</name>
<message>
<location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="69"/>
<location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="84"/>
<location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="96"/>
<source>Konsole not installed</source>
<translation>未安裝 Konsole</translation>
</message>
<message>
<location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="70"/>
<location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="85"/>
<location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="97"/>
<source>Please install the kde konsole and try again!</source>
<translation>請安裝 kde konsole 然後再試一次!</translation>
</message>
<message>
<location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="122"/>
<source>Executing script: &amp;nbsp;&lt;code&gt;%1&lt;/code&gt;</source>
<translation>正在執行指令稿:&amp;nbsp;&lt;code&gt;%1&lt;/code&gt;</translation>
</message>
</context>
<context>
<name>InteractiveTerminalViewStep</name>
<message>
<location filename="../src/modules/interactiveterminal/InteractiveTerminalViewStep.cpp" line="45"/>
<source>Script</source>
<translation>指令稿</translation>
</message>
</context>
<context>
<name>KeyboardPage</name>
<message>
<location filename="../src/modules/keyboard/KeyboardPage.cpp" line="220"/>
<source>Set keyboard model to %1.&lt;br/&gt;</source>
<translation>設定鍵盤型號為 %1 。&lt;br/&gt;</translation>
</message>
<message>
<location filename="../src/modules/keyboard/KeyboardPage.cpp" line="222"/>
<source>Set keyboard layout to %1/%2.</source>
<translation>設定鍵盤佈局為 %1/%2 。</translation>
</message>
</context>
<context>
<name>KeyboardViewStep</name>
<message>
<location filename="../src/modules/keyboard/KeyboardViewStep.cpp" line="50"/>
<source>Keyboard</source>
<translation>鍵盤</translation>
</message>
</context>
<context>
<name>LCLocaleDialog</name>
<message>
<location filename="../src/modules/locale/LCLocaleDialog.cpp" line="34"/>
<source>System locale setting</source>
<translation>系統語系設定</translation>
</message>
<message>
<location filename="../src/modules/locale/LCLocaleDialog.cpp" line="41"/>
<source>The system locale setting affects the language and character set for some command line user interface elements.&lt;br/&gt;The current setting is &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>系統語系設定會影響部份命令列使用者介面的語言及字元集。&lt;br/&gt;目前的設定為 &lt;strong&gt;%1&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/modules/locale/LCLocaleDialog.cpp" line="66"/>
<source>&amp;Cancel</source>
<translation>取消(&amp;C)</translation>
</message>
<message>
<location filename="../src/modules/locale/LCLocaleDialog.cpp" line="67"/>
<source>&amp;OK</source>
<translation>確定(&amp;O)</translation>
</message>
</context>
<context>
<name>LicensePage</name>
<message>
<location filename="../src/modules/license/LicensePage.ui" line="14"/>
<source>Form</source>
<translation>表單</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="88"/>
<source>I accept the terms and conditions above.</source>
<translation>我接受上述的條款與條件。</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="115"/>
<source>&lt;h1&gt;License Agreement&lt;/h1&gt;This setup procedure will install proprietary software that is subject to licensing terms.</source>
<translation>&lt;h1&gt;授權協定&lt;/h1&gt;此安裝程式將會安裝受授權條款所限制的專有軟體。</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="118"/>
<source>Please review the End User License Agreements (EULAs) above.&lt;br/&gt;If you do not agree with the terms, the setup procedure cannot continue.</source>
<translation>請仔細上方的最終用戶授權協定 (EULA)。&lt;br/&gt;若您不同意上述條款,安裝程式將不會繼續。</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="124"/>
<source>&lt;h1&gt;License Agreement&lt;/h1&gt;This setup procedure can install proprietary software that is subject to licensing terms in order to provide additional features and enhance the user experience.</source>
<translation>&lt;h1&gt;授權協定&lt;/h1&gt;此安裝程式可以安裝受授權條款限制的專有軟體,以提供額外的功農與增強使用者體驗。</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="129"/>
<source>Please review the End User License Agreements (EULAs) above.&lt;br/&gt;If you do not agree with the terms, proprietary software will not be installed, and open source alternatives will be used instead.</source>
<translation>請仔細上方的最終用戶授權協定 (EULA)。&lt;br/&gt;若您不同意上述條款,將不會安裝專有軟體,而會使用其開放原始螞碼版本作為替代。</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="159"/>
<source>&lt;strong&gt;%1 driver&lt;/strong&gt;&lt;br/&gt;by %2</source>
<extracomment>%1 is an untranslatable product name, example: Creative Audigy driver</extracomment>
<translation>&lt;strong&gt;%1 驅動程式&lt;/strong&gt;&lt;br/&gt;由 %2 所提供</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="166"/>
<source>&lt;strong&gt;%1 graphics driver&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
<extracomment>%1 is usually a vendor name, example: Nvidia graphics driver</extracomment>
<translation>&lt;strong&gt;%1 顯示卡驅動程式&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;由 %2 所提供&lt;/font&gt;</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="172"/>
<source>&lt;strong&gt;%1 browser plugin&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
<translation>&lt;strong&gt;%1 瀏覽器外掛程式&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;由 %2 所提供&lt;/font&gt;</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="178"/>
<source>&lt;strong&gt;%1 codec&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
<translation>&lt;strong&gt;%1 編解碼器&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;由 %2 所提供&lt;/font&gt;</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="184"/>
<source>&lt;strong&gt;%1 package&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
<translation>&lt;strong&gt;%1 軟體包&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;由 %2 所提供&lt;/font&gt;</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="190"/>
<source>&lt;strong&gt;%1&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
<translation>&lt;strong&gt;%1&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;由 %2 所提供&lt;/font&gt;</translation>
</message>
<message>
<location filename="../src/modules/license/LicensePage.cpp" line="202"/>
<source>&lt;a href=&quot;%1&quot;&gt;view license agreement&lt;/a&gt;</source>
<translation>&lt;a href=&quot;%1&quot;&gt;檢視授權協定&lt;/a&gt;</translation>
</message>
</context>
<context>
<name>LicenseViewStep</name>
<message>
<location filename="../src/modules/license/LicenseViewStep.cpp" line="51"/>
<source>License</source>
<translation>授權條款</translation>
</message>
</context>
<context>
<name>LocalePage</name>
<message>
<location filename="../src/modules/locale/LocalePage.cpp" line="387"/>
<source>The system language will be set to %1.</source>
<translation>系統語言將會設定為 %1。</translation>
</message>
<message>
<location filename="../src/modules/locale/LocalePage.cpp" line="389"/>
<source>The numbers and dates locale will be set to %1.</source>
<translation>數字與日期語系將會被設定為 %1。</translation>
</message>
<message>
<location filename="../src/modules/locale/LocalePage.cpp" line="215"/>
<source>Region:</source>
<translation>地區</translation>
</message>
<message>
<location filename="../src/modules/locale/LocalePage.cpp" line="216"/>
<source>Zone:</source>
<translation>時區</translation>
</message>
<message>
<location filename="../src/modules/locale/LocalePage.cpp" line="220"/>
<location filename="../src/modules/locale/LocalePage.cpp" line="221"/>
<source>&amp;Change...</source>
<translation>變更...(&amp;C)</translation>
</message>
<message>
<location filename="../src/modules/locale/LocalePage.cpp" line="398"/>
<source>Set timezone to %1/%2.&lt;br/&gt;</source>
<translation>設定時區為 %1/%2 。&lt;br/&gt;</translation>
</message>
<message>
<location filename="../src/modules/locale/LocalePage.cpp" line="480"/>
<source>%1 (%2)</source>
<extracomment>Language (Country)</extracomment>
<translation>%1 (%2)</translation>
</message>
</context>
<context>
<name>LocaleViewStep</name>
<message>
<location filename="../src/modules/locale/LocaleViewStep.cpp" line="52"/>
<source>Loading location data...</source>
<translation>讀取位置資料 ...</translation>
</message>
<message>
<location filename="../src/modules/locale/LocaleViewStep.cpp" line="169"/>
<source>Location</source>
<translation>位置</translation>
</message>
</context>
<context>
<name>MoveFileSystemJob</name>
<message>
<location filename="../src/modules/partition/jobs/MoveFileSystemJob.cpp" line="66"/>
<source>Move file system of partition %1.</source>
<translation>移動分割區 %1 的檔案系統。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/MoveFileSystemJob.cpp" line="80"/>
<source>Could not open file system on partition %1 for moving.</source>
<translation>無法開啟在分割區 %1 上的檔案系統來進行移動。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/MoveFileSystemJob.cpp" line="86"/>
<source>Could not create target for moving file system on partition %1.</source>
<translation>無法建立目標以移動分割區 %1 上的檔案系統。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/MoveFileSystemJob.cpp" line="95"/>
<source>Moving of partition %1 failed, changes have been rolled back.</source>
<translation>移動分割區 %1 失敗,所作的修改已回復原狀。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/MoveFileSystemJob.cpp" line="101"/>
<source>Moving of partition %1 failed. Roll back of the changes have failed.</source>
<translation>移動分割區 %1 失敗。恢復所作的修改失敗。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/MoveFileSystemJob.cpp" line="113"/>
<source>Updating boot sector after the moving of partition %1 failed.</source>
<translation>在移動分割區 %1 失敗後,正在更新開機磁區。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/MoveFileSystemJob.cpp" line="127"/>
<source>The logical sector sizes in the source and target for copying are not the same. This is currently unsupported.</source>
<translation>要複製的來源與目標的邏輯磁區大小不相同。目前尚不支援。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/MoveFileSystemJob.cpp" line="201"/>
<source>Source and target for copying do not overlap: Rollback is not required.</source>
<translation>要複製的來源和目標並無交集:不需要恢復所作的修改。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/MoveFileSystemJob.cpp" line="225"/>
<location filename="../src/modules/partition/jobs/MoveFileSystemJob.cpp" line="233"/>
<source>Could not open device %1 to rollback copying.</source>
<translation>無法開啟裝置 %1 以恢復所作的複製。</translation>
</message>
</context>
<context>
<name>NetInstallPage</name>
<message>
<location filename="../src/modules/netinstall/NetInstallPage.cpp" line="79"/>
<source>Name</source>
<translation>名稱</translation>
</message>
<message>
<location filename="../src/modules/netinstall/NetInstallPage.cpp" line="80"/>
<source>Description</source>
<translation>描述</translation>
</message>
<message>
<location filename="../src/modules/netinstall/NetInstallPage.cpp" line="97"/>
<location filename="../src/modules/netinstall/NetInstallPage.cpp" line="104"/>
<source>Network Installation. (Disabled: Unable to fetch package lists, check your network connection)</source>
<translation>網路安裝。(已停用:無法擷取軟體包清單,請檢查您的網路連線)</translation>
</message>
</context>
<context>
<name>NetInstallViewStep</name>
<message>
<location filename="../src/modules/netinstall/NetInstallViewStep.cpp" line="51"/>
<source>Package selection</source>
<translation>軟體包選擇</translation>
</message>
</context>
<context>
<name>Page_Keyboard</name>
<message>
<location filename="../src/modules/keyboard/KeyboardPage.ui" line="14"/>
<source>Form</source>
<translation>Form</translation>
</message>
<message>
<location filename="../src/modules/keyboard/KeyboardPage.ui" line="70"/>
<source>Keyboard Model:</source>
<translation>鍵盤型號:</translation>
</message>
<message>
<location filename="../src/modules/keyboard/KeyboardPage.ui" line="131"/>
<source>Type here to test your keyboard</source>
<translation>在此輸入以測試您的鍵盤</translation>
</message>
</context>
<context>
<name>Page_UserSetup</name>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="14"/>
<source>Form</source>
<translation>Form</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="36"/>
<source>What is your name?</source>
<translation>該如何稱呼您?</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="117"/>
<source>What name do you want to use to log in?</source>
<translation>您想使用何種登入名稱?</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="306"/>
<location filename="../src/modules/users/page_usersetup.ui" line="437"/>
<location filename="../src/modules/users/page_usersetup.ui" line="582"/>
<source>font-weight: normal</source>
<translation>font-weight: normal</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="200"/>
<source>&lt;small&gt;If more than one person will use this computer, you can set up multiple accounts after installation.&lt;/small&gt;</source>
<translation>&lt;small&gt;如果將會有多於一人使用這臺電腦,您可以在安裝後設定多個帳號。&lt;/small&gt;</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="335"/>
<source>Choose a password to keep your account safe.</source>
<translation>輸入密碼以確保帳號的安全性。</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="440"/>
<source>&lt;small&gt;Enter the same password twice, so that it can be checked for typing errors. A good password will contain a mixture of letters, numbers and punctuation, should be at least eight characters long, and should be changed at regular intervals.&lt;/small&gt;</source>
<translation>&lt;small&gt;輸入同一個密碼兩次,以檢查輸入錯誤。一個好的密碼包含了字母、數字及標點符號的組合、至少八個字母長,且按一固定週期更換。&lt;/small&gt;</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="226"/>
<source>What is the name of this computer?</source>
<translation>這部電腦的名字是?</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="309"/>
<source>&lt;small&gt;This name will be used if you make the computer visible to others on a network.&lt;/small&gt;</source>
<translation>&lt;small&gt;若您將此電腦設定為讓網路上的其他電腦可見時將會使用此名稱。&lt;/small&gt;</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="450"/>
<source>Log in automatically without asking for the password.</source>
<translation>不詢問密碼自動登入。</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="457"/>
<source>Use the same password for the administrator account.</source>
<translation>為管理員帳號使用同樣的密碼。</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="480"/>
<source>Choose a password for the administrator account.</source>
<translation>替系統管理員帳號設定一組密碼</translation>
</message>
<message>
<location filename="../src/modules/users/page_usersetup.ui" line="585"/>
<source>&lt;small&gt;Enter the same password twice, so that it can be checked for typing errors.&lt;/small&gt;</source>
<translation>&lt;small&gt;輸入同樣的密碼兩次,這樣可以檢查輸入錯誤。&lt;/small&gt;</translation>
</message>
</context>
<context>
<name>PartitionLabelsView</name>
<message>
<location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="193"/>
<source>Root</source>
<translation>根目錄</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="196"/>
<source>Home</source>
<translation>家目錄</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="198"/>
<source>Boot</source>
<translation>Boot</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="201"/>
<source>EFI system</source>
<translation>EFI 系統</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="203"/>
<source>Swap</source>
<translation>Swap</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="205"/>
<source>New partition for %1</source>
<translation>%1 的新分割區</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="207"/>
<source>New partition</source>
<translation>新分割區</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="224"/>
<source>%1 %2</source>
<translation>%1 %2</translation>
</message>
</context>
<context>
<name>PartitionModel</name>
<message>
<location filename="../src/modules/partition/core/PartitionModel.cpp" line="137"/>
<location filename="../src/modules/partition/core/PartitionModel.cpp" line="169"/>
<source>Free Space</source>
<translation>剩餘空間</translation>
</message>
<message>
<location filename="../src/modules/partition/core/PartitionModel.cpp" line="141"/>
<location filename="../src/modules/partition/core/PartitionModel.cpp" line="173"/>
<source>New partition</source>
<translation>新分割區</translation>
</message>
<message>
<location filename="../src/modules/partition/core/PartitionModel.cpp" line="257"/>
<source>Name</source>
<translation>名稱</translation>
</message>
<message>
<location filename="../src/modules/partition/core/PartitionModel.cpp" line="259"/>
<source>File System</source>
<translation>檔案系統</translation>
</message>
<message>
<location filename="../src/modules/partition/core/PartitionModel.cpp" line="261"/>
<source>Mount Point</source>
<translation>掛載點</translation>
</message>
<message>
<location filename="../src/modules/partition/core/PartitionModel.cpp" line="263"/>
<source>Size</source>
<translation>大小</translation>
</message>
</context>
<context>
<name>PartitionPage</name>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.ui" line="14"/>
<source>Form</source>
<translation>Form</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.ui" line="22"/>
<source>Storage de&amp;vice:</source>
<translation>儲存裝置(&amp;V)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.ui" line="51"/>
<source>&amp;Revert All Changes</source>
<translation>將所有變更恢復原狀 (&amp;R)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.ui" line="87"/>
<source>New Partition &amp;Table</source>
<translation>新的分割表格 (&amp;T)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.ui" line="107"/>
<source>&amp;Create</source>
<translation>新增 (&amp;C)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.ui" line="114"/>
<source>&amp;Edit</source>
<translation>編輯 (&amp;E)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.ui" line="121"/>
<source>&amp;Delete</source>
<translation>刪除 (&amp;D)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.ui" line="148"/>
<source>Install boot &amp;loader on:</source>
<translation>安裝開機載入器在(&amp;L)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionPage.cpp" line="161"/>
<source>Are you sure you want to create a new partition table on %1?</source>
<translation>您是否確定要在 %1 上建立一個新的分割區表格?</translation>
</message>
</context>
<context>
<name>PartitionViewStep</name>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="70"/>
<source>Gathering system information...</source>
<translation>蒐集系統資訊中...</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="121"/>
<source>Partitions</source>
<translation>分割區</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="158"/>
<source>Install %1 &lt;strong&gt;alongside&lt;/strong&gt; another operating system.</source>
<translation>將 %1 安裝在其他作業系統&lt;strong&gt;旁邊&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="162"/>
<source>&lt;strong&gt;Erase&lt;/strong&gt; disk and install %1.</source>
<translation>&lt;strong&gt;抹除&lt;/strong&gt;磁碟並安裝 %1。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="166"/>
<source>&lt;strong&gt;Replace&lt;/strong&gt; a partition with %1.</source>
<translation>以 %1 &lt;strong&gt;取代&lt;/strong&gt;一個分割區。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="171"/>
<source>&lt;strong&gt;Manual&lt;/strong&gt; partitioning.</source>
<translation>&lt;strong&gt;手動&lt;/strong&gt;分割</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="184"/>
<source>Install %1 &lt;strong&gt;alongside&lt;/strong&gt; another operating system on disk &lt;strong&gt;%2&lt;/strong&gt; (%3).</source>
<translation>將 %1 安裝在磁碟 &lt;strong&gt;%2&lt;/strong&gt; (%3) 上的另一個作業系統&lt;strong&gt;旁邊&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="190"/>
<source>&lt;strong&gt;Erase&lt;/strong&gt; disk &lt;strong&gt;%2&lt;/strong&gt; (%3) and install %1.</source>
<translation>&lt;strong&gt;抹除&lt;/strong&gt; 磁碟 &lt;strong&gt;%2&lt;/strong&gt; (%3) 並且安裝 %1。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="196"/>
<source>&lt;strong&gt;Replace&lt;/strong&gt; a partition on disk &lt;strong&gt;%2&lt;/strong&gt; (%3) with %1.</source>
<translation>以 %1 &lt;strong&gt;取代&lt;/strong&gt; 一個在磁碟 &lt;strong&gt;%2&lt;/strong&gt; (%3) 上的分割區。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="203"/>
<source>&lt;strong&gt;Manual&lt;/strong&gt; partitioning on disk &lt;strong&gt;%1&lt;/strong&gt; (%2).</source>
<translation>在磁碟 &lt;strong&gt;%1&lt;/strong&gt; (%2) 上&lt;strong&gt;手動&lt;/strong&gt;分割。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="211"/>
<source>Disk &lt;strong&gt;%1&lt;/strong&gt; (%2)</source>
<translation>磁碟 &lt;strong&gt;%1&lt;/strong&gt; (%2)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="239"/>
<source>Current:</source>
<translation>目前:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="256"/>
<source>After:</source>
<translation>之後:</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="399"/>
<source>No EFI system partition configured</source>
<translation>未設定 EFI 系統分割區</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="400"/>
<source>An EFI system partition is necessary to start %1.&lt;br/&gt;&lt;br/&gt;To configure an EFI system partition, go back and select or create a FAT32 filesystem with the &lt;strong&gt;esp&lt;/strong&gt; flag enabled and mount point &lt;strong&gt;%2&lt;/strong&gt;.&lt;br/&gt;&lt;br/&gt;You can continue without setting up an EFI system partition but your system may fail to start.</source>
<translation>需要一個 EFI 系統分割區以啟動 %1。&lt;br/&gt;&lt;br/&gt;要設定 EFI 系統分割區,回到上一步並選取或建立一個包含啟用的 &lt;strong&gt;esp&lt;/strong&gt; 旗標以及掛載點 &lt;strong&gt;%2&lt;/strong&gt; 的 FAT32 檔案系統。&lt;br/&gt;&lt;br/&gt;您也可以不設定 EFI 系統分割區並繼續,但是您的系統可能會啟動失敗。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="413"/>
<source>EFI system partition flag not set</source>
<translation>EFI 系統分割區旗標未設定</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="414"/>
<source>An EFI system partition is necessary to start %1.&lt;br/&gt;&lt;br/&gt;A partition was configured with mount point &lt;strong&gt;%2&lt;/strong&gt; but its &lt;strong&gt;esp&lt;/strong&gt; flag is not set.&lt;br/&gt;To set the flag, go back and edit the partition.&lt;br/&gt;&lt;br/&gt;You can continue without setting the flag but your system may fail to start.</source>
<translation>需要一個 EFI 系統分割區以啟動 %1。&lt;br/&gt;&lt;br/&gt;有一個掛載點設定為 &lt;strong&gt;%2&lt;/strong&gt; 但未設定 &lt;strong&gt;esp&lt;/strong&gt; 旗標的分割區。&lt;br/&gt;要設定此旗標,回到上一步並編輯分割區。&lt;br/&gt;&lt;br/&gt;您也可以不設定旗標而繼續,但您的系統可能會啟動失敗。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="448"/>
<source>Boot partition not encrypted</source>
<translation>開機分割區未加密</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="449"/>
<source>A separate boot partition was set up together with an encrypted root partition, but the boot partition is not encrypted.&lt;br/&gt;&lt;br/&gt;There are security concerns with this kind of setup, because important system files are kept on an unencrypted partition.&lt;br/&gt;You may continue if you wish, but filesystem unlocking will happen later during system startup.&lt;br/&gt;To encrypt the boot partition, go back and recreate it, selecting &lt;strong&gt;Encrypt&lt;/strong&gt; in the partition creation window.</source>
<translation>單獨的開機分割區會與加密的根分割區一起設定,但是開機分割區並不會被加密。&lt;br/&gt;&lt;br/&gt;這種設定可能會造成安全性問題,因為系統檔案放在未加密的分割區中。&lt;br/&gt;若您想要,您可以繼續,但是檔案系統的解鎖會在系統啟動後才發生。&lt;br/&gt;要加密開機分割區,回到上一頁並重新建立它,在分割區建立視窗中選取&lt;strong&gt;加密&lt;/strong&gt;</translation>
</message>
</context>
<context>
<name>QObject</name>
<message>
<location filename="../src/modules/keyboard/keyboardwidget/keyboardglobal.cpp" line="82"/>
<source>Default Keyboard Model</source>
<translation>預設鍵盤型號</translation>
</message>
<message>
<location filename="../src/modules/keyboard/keyboardwidget/keyboardglobal.cpp" line="127"/>
<location filename="../src/modules/keyboard/keyboardwidget/keyboardglobal.cpp" line="163"/>
<source>Default</source>
<translation>預設值</translation>
</message>
<message>
<location filename="../src/modules/partition/core/KPMHelpers.cpp" line="210"/>
<source>unknown</source>
<translation>未知</translation>
</message>
<message>
<location filename="../src/modules/partition/core/KPMHelpers.cpp" line="212"/>
<source>extended</source>
<translation>延伸分割區</translation>
</message>
<message>
<location filename="../src/modules/partition/core/KPMHelpers.cpp" line="214"/>
<source>unformatted</source>
<translation>未格式化</translation>
</message>
<message>
<location filename="../src/modules/partition/core/KPMHelpers.cpp" line="216"/>
<source>swap</source>
<translation>swap</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="49"/>
<source>Unpartitioned space or unknown partition table</source>
<translation>尚未分割的空間或是未知的分割表</translation>
</message>
</context>
<context>
<name>ReplaceWidget</name>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.ui" line="14"/>
<source>Form</source>
<translation>表單</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="134"/>
<source>Select where to install %1.&lt;br/&gt;&lt;font color=&quot;red&quot;&gt;Warning: &lt;/font&gt;this will delete all files on the selected partition.</source>
<translation>選取要在哪裡安裝 %1。&lt;br/&gt;&lt;font color=&quot;red&quot;&gt;警告:&lt;/font&gt;這將會刪除所有在選定分割區中的檔案。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="160"/>
<source>The selected item does not appear to be a valid partition.</source>
<translation>選定的項目似乎不是一個有效的分割區。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="168"/>
<source>%1 cannot be installed on empty space. Please select an existing partition.</source>
<translation>%1 無法在空白的空間中安裝。請選取一個存在的分割區。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="178"/>
<source>%1 cannot be installed on an extended partition. Please select an existing primary or logical partition.</source>
<translation>%1 無法在延伸分割區上安裝。請選取一個存在的主要或邏輯分割區。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="188"/>
<source>%1 cannot be installed on this partition.</source>
<translation>%1 無法在此分割區上安裝。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="194"/>
<source>Data partition (%1)</source>
<translation>資料分割區 (%1)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="211"/>
<source>Unknown system partition (%1)</source>
<translation>未知的系統分割區 (%1)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="216"/>
<source>%1 system partition (%2)</source>
<translation>%1 系統分割區 (%2)</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="227"/>
<source>&lt;strong&gt;%4&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;The partition %1 is too small for %2. Please select a partition with capacity at least %3 GiB.</source>
<translation>&lt;strong&gt;%4&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;分割區 %1 對 %2 來說太小了。請選取一個容量至少有 %3 GiB 的分割區。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="250"/>
<source>&lt;strong&gt;%2&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1.</source>
<translation>&lt;strong&gt;%2&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;在這個系統上找不到任何的 EFI 系統分割區。請回到上一步並使用手動分割以設定 %1。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="261"/>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="278"/>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="302"/>
<source>&lt;strong&gt;%3&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;%1 will be installed on %2.&lt;br/&gt;&lt;font color=&quot;red&quot;&gt;Warning: &lt;/font&gt;all data on partition %2 will be lost.</source>
<translation>&lt;strong&gt;%3&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;%1 將會安裝在 %2 上。&lt;br/&gt;&lt;font color=&quot;red&quot;&gt;警告: &lt;/font&gt;所有在分割區 %2 上的資料都將會遺失。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="270"/>
<source>The EFI system partition at %1 will be used for starting %2.</source>
<translation>在 %1 的 EFI 系統分割區將會在開始 %2 時使用。</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="286"/>
<source>EFI system partition:</source>
<translation>EFI 系統分割區:</translation>
</message>
</context>
<context>
<name>RequirementsChecker</name>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="67"/>
<source>Gathering system information...</source>
<translation>收集系統資訊中...</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="111"/>
<source>has at least %1 GB available drive space</source>
<translation>有至少 %1 GB 的可用磁碟空間</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="113"/>
<source>There is not enough drive space. At least %1 GB is required.</source>
<translation>沒有足夠的磁碟空間。至少需要 %1 GB。</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="121"/>
<source>has at least %1 GB working memory</source>
<translation>有至少 %1 GB 的可用記憶體</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="123"/>
<source>The system does not have enough working memory. At least %1 GB is required.</source>
<translation>系統沒有足夠的記憶體。至少需要 %1 GB。</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="131"/>
<source>is plugged in to a power source</source>
<translation>已插入外接電源</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="132"/>
<source>The system is not plugged in to a power source.</source>
<translation>系統未插入外接電源。</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="139"/>
<source>is connected to the Internet</source>
<translation>已連上網際網路</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="140"/>
<source>The system is not connected to the Internet.</source>
<translation>系統未連上網際網路</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="148"/>
<source>The installer is not running with administrator rights.</source>
<translation>安裝程式並未以管理員權限執行。</translation>
</message>
<message>
<location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="156"/>
<source>The screen is too small to display the installer.</source>
<translation>螢幕太小了,沒辦法顯示安裝程式。</translation>
</message>
</context>
<context>
<name>ResizeFileSystemJob</name>
<message>
<location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="76"/>
<source>Resize file system on partition %1.</source>
<translation>調整分割區 %1 上的檔案系統大小。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="91"/>
<source>Parted failed to resize filesystem.</source>
<translation>Parted 調整檔案系統大小失敗。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="101"/>
<source>Failed to resize filesystem.</source>
<translation>調整檔案系統大小失敗。</translation>
</message>
</context>
<context>
<name>ResizePartitionJob</name>
<message>
<location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="187"/>
<source>Resize partition %1.</source>
<translation>調整分割區 %1 大小。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="194"/>
<source>Resize &lt;strong&gt;%2MB&lt;/strong&gt; partition &lt;strong&gt;%1&lt;/strong&gt; to &lt;strong&gt;%3MB&lt;/strong&gt;.</source>
<translation>重新調整 &lt;strong&gt;%2MB&lt;/strong&gt; 的分割區 &lt;strong&gt;%1&lt;/strong&gt;&lt;strong&gt;%3MB&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="205"/>
<source>Resizing %2MB partition %1 to %3MB.</source>
<translation>調整 %2MB 分割區 %1 至 %3MB。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="232"/>
<location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="298"/>
<source>The installer failed to resize partition %1 on disk &apos;%2&apos;.</source>
<translation>安裝程式調整在磁碟 &apos;%2&apos; 上的分割區 %1 的大小失敗。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="237"/>
<source>Could not open device &apos;%1&apos;.</source>
<translation>無法開啟裝置 &apos;%1&apos;</translation>
</message>
</context>
<context>
<name>ScanningDialog</name>
<message>
<location filename="../src/modules/partition/gui/ScanningDialog.cpp" line="84"/>
<source>Scanning storage devices...</source>
<translation>正在掃描儲存裝置...</translation>
</message>
<message>
<location filename="../src/modules/partition/gui/ScanningDialog.cpp" line="85"/>
<source>Partitioning</source>
<translation>正在分割</translation>
</message>
</context>
<context>
<name>SetHostNameJob</name>
<message>
<location filename="../src/modules/users/SetHostNameJob.cpp" line="37"/>
<source>Set hostname %1</source>
<translation>設定主機名 %1</translation>
</message>
<message>
<location filename="../src/modules/users/SetHostNameJob.cpp" line="44"/>
<source>Set hostname &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>設定主機名稱 &lt;strong&gt;%1&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/modules/users/SetHostNameJob.cpp" line="51"/>
<source>Setting hostname %1.</source>
<translation>正在設定主機名稱 %1。</translation>
</message>
<message>
<location filename="../src/modules/users/SetHostNameJob.cpp" line="61"/>
<location filename="../src/modules/users/SetHostNameJob.cpp" line="68"/>
<source>Internal Error</source>
<translation>內部錯誤</translation>
</message>
<message>
<location filename="../src/modules/users/SetHostNameJob.cpp" line="75"/>
<location filename="../src/modules/users/SetHostNameJob.cpp" line="86"/>
<source>Cannot write hostname to target system</source>
<translation>無法寫入主機名稱到目標系統</translation>
</message>
</context>
<context>
<name>SetKeyboardLayoutJob</name>
<message>
<location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="59"/>
<source>Set keyboard model to %1, layout to %2-%3</source>
<translation>將鍵盤型號設定為 %1佈局為 %2-%3</translation>
</message>
<message>
<location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="320"/>
<source>Failed to write keyboard configuration for the virtual console.</source>
<translation>為虛擬終端機寫入鍵盤設定失敗。</translation>
</message>
<message>
<location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="321"/>
<location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="325"/>
<location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="331"/>
<source>Failed to write to %1</source>
<translation>寫入到 %1 失敗</translation>
</message>
<message>
<location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="324"/>
<source>Failed to write keyboard configuration for X11.</source>
<translation>為 X11 寫入鍵盤設定失敗。</translation>
</message>
<message>
<location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="330"/>
<source>Failed to write keyboard configuration to existing /etc/default directory.</source>
<translation>寫入鍵盤設定到已存在的 /etc/default 目錄失敗。</translation>
</message>
</context>
<context>
<name>SetPartFlagsJob</name>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="48"/>
<source>Set flags on partition %1.</source>
<translation>在分割區 %1 上設定旗標。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="51"/>
<source>Set flags on %1MB %2 partition.</source>
<translation>在 %1MB 的 %2 分割區上設定旗標。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="55"/>
<source>Set flags on new partition.</source>
<translation>在新分割區上設定旗標。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="66"/>
<source>Clear flags on partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>在分割區 &lt;strong&gt;%1&lt;/strong&gt; 上清除旗標。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="70"/>
<source>Clear flags on %1MB &lt;strong&gt;%2&lt;/strong&gt; partition.</source>
<translation>清除在 %1MB 的 &lt;strong&gt;%2&lt;/strong&gt; 分割區上的旗標。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="74"/>
<source>Clear flags on new partition.</source>
<translation>清除在新分割區上的旗標。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="78"/>
<source>Flag partition &lt;strong&gt;%1&lt;/strong&gt; as &lt;strong&gt;%2&lt;/strong&gt;.</source>
<translation>將分割區 &lt;strong&gt;%1&lt;/strong&gt; 的旗標設定為 &lt;strong&gt;%2&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="84"/>
<source>Flag %1MB &lt;strong&gt;%2&lt;/strong&gt; partition as &lt;strong&gt;%3&lt;/strong&gt;.</source>
<translation>將 %1MB 的 &lt;strong&gt;%2&lt;/strong&gt; 分割區旗標設定為 &lt;strong&gt;%3&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="90"/>
<source>Flag new partition as &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>將新割區旗標設定為 &lt;strong&gt;%1&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="102"/>
<source>Clearing flags on partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>正在分割區 &lt;strong&gt;%1&lt;/strong&gt; 上清除旗標。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="106"/>
<source>Clearing flags on %1MB &lt;strong&gt;%2&lt;/strong&gt; partition.</source>
<translation>清除在 %1MB 的 &lt;strong&gt;%2&lt;/strong&gt; 分割區上的旗標。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="110"/>
<source>Clearing flags on new partition.</source>
<translation>清除在新分割區上的旗標。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="114"/>
<source>Setting flags &lt;strong&gt;%2&lt;/strong&gt; on partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
<translation>正在分割區 &lt;strong&gt;%1&lt;/strong&gt; 上設定旗標。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="120"/>
<source>Setting flags &lt;strong&gt;%3&lt;/strong&gt; on %1MB &lt;strong&gt;%2&lt;/strong&gt; partition.</source>
<translation>正在 %1MB 的 &lt;strong&gt;%2&lt;/strong&gt; 分割區上設定旗標 &lt;strong&gt;%3&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="126"/>
<source>Setting flags &lt;strong&gt;%1&lt;/strong&gt; on new partition.</source>
<translation>正在新分割區上設定旗標 &lt;strong&gt;%1&lt;/strong&gt;</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="140"/>
<source>The installer failed to set flags on partition %1.</source>
<translation>安裝程式在分割區 %1 上設定旗標失敗。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="148"/>
<source>Could not open device &apos;%1&apos;.</source>
<translation>無法開啟裝置「%1」。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="157"/>
<source>Could not open partition table on device &apos;%1&apos;.</source>
<translation>無法開啟在裝置「%1」上的分割區表格。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="169"/>
<source>Could not find partition &apos;%1&apos;.</source>
<translation>找不到分割區「%1」。</translation>
</message>
</context>
<context>
<name>SetPartGeometryJob</name>
<message>
<location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="144"/>
<source>Update geometry of partition %1.</source>
<translation>更新分割區 %1 佈局。</translation>
</message>
<message>
<location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="156"/>
<source>Failed to change the geometry of the partition.</source>
<translation>更改分割區佈局失敗。</translation>
</message>
</context>
<context>
<name>SetPasswordJob</name>
<message>
<location filename="../src/modules/users/SetPasswordJob.cpp" line="48"/>
<source>Set password for user %1</source>
<translation>為使用者 %1 設定密碼</translation>
</message>
<message>
<location filename="../src/modules/users/SetPasswordJob.cpp" line="55"/>
<source>Setting password for user %1.</source>
<translation>正在為使用者 %1 設定密碼。</translation>
</message>
<message>
<location filename="../src/modules/users/SetPasswordJob.cpp" line="112"/>
<source>Bad destination system path.</source>
<translation>非法的目標系統路徑。</translation>
</message>
<message>
<location filename="../src/modules/users/SetPasswordJob.cpp" line="113"/>
<source>rootMountPoint is %1</source>
<translation>根掛載點為 %1</translation>
</message>
<message>
<location filename="../src/modules/users/SetPasswordJob.cpp" line="123"/>
<source>Cannot disable root account.</source>
<translation>無法停用 root 帳號。</translation>
</message>
<message>
<location filename="../src/modules/users/SetPasswordJob.cpp" line="124"/>
<source>passwd terminated with error code %1.</source>
<translation>passwd 以錯誤代碼 %1 終止。</translation>
</message>
<message>
<location filename="../src/modules/users/SetPasswordJob.cpp" line="139"/>
<source>Cannot set password for user %1.</source>
<translation>無法為使用者 %1 設定密碼。</translation>
</message>
<message>
<location filename="../src/modules/users/SetPasswordJob.cpp" line="141"/>
<source>usermod terminated with error code %1.</source>
<translation>usermod 以錯誤代碼 %1 終止。</translation>
</message>
</context>
<context>
<name>SetTimezoneJob</name>
<message>
<location filename="../src/modules/locale/SetTimezoneJob.cpp" line="43"/>
<source>Set timezone to %1/%2</source>
<translation>設定時區為 %1/%2</translation>
</message>
<message>
<location filename="../src/modules/locale/SetTimezoneJob.cpp" line="71"/>
<source>Cannot access selected timezone path.</source>
<translation>無法存取指定的時區路徑。</translation>
</message>
<message>
<location filename="../src/modules/locale/SetTimezoneJob.cpp" line="72"/>
<source>Bad path: %1</source>
<translation>非法路徑:%1</translation>
</message>
<message>
<location filename="../src/modules/locale/SetTimezoneJob.cpp" line="86"/>
<source>Cannot set timezone.</source>
<translation>無法設定時區。</translation>
</message>
<message>
<location filename="../src/modules/locale/SetTimezoneJob.cpp" line="87"/>
<source>Link creation failed, target: %1; link name: %2</source>
<translation>連結建立失敗,目標:%1連結名稱%2</translation>
</message>
<message>
<location filename="../src/modules/locale/SetTimezoneJob.cpp" line="96"/>
<source>Cannot set timezone,</source>
<translation>無法設定時區。</translation>
</message>
<message>
<location filename="../src/modules/locale/SetTimezoneJob.cpp" line="97"/>
<source>Cannot open /etc/timezone for writing</source>
<translation>無法開啟要寫入的 /etc/timezone</translation>
</message>
</context>
<context>
<name>SummaryPage</name>
<message>
<location filename="../src/modules/summary/SummaryPage.cpp" line="49"/>
<source>This is an overview of what will happen once you start the install procedure.</source>
<translation>這是您開始安裝後所會發生的事的概覽。</translation>
</message>
</context>
<context>
<name>SummaryViewStep</name>
<message>
<location filename="../src/modules/summary/SummaryViewStep.cpp" line="43"/>
<source>Summary</source>
<translation>總覽</translation>
</message>
</context>
<context>
<name>UsersPage</name>
<message>
<location filename="../src/modules/users/UsersPage.cpp" line="287"/>
<source>Your username is too long.</source>
<translation>您的使用者名稱太長了。</translation>
</message>
<message>
<location filename="../src/modules/users/UsersPage.cpp" line="293"/>
<source>Your username contains invalid characters. Only lowercase letters and numbers are allowed.</source>
<translation>您的使用者名稱含有無效的字元。只能使用小寫字母及數字。</translation>
</message>
<message>
<location filename="../src/modules/users/UsersPage.cpp" line="331"/>
<source>Your hostname is too short.</source>
<translation>您的主機名稱太短了。</translation>
</message>
<message>
<location filename="../src/modules/users/UsersPage.cpp" line="337"/>
<source>Your hostname is too long.</source>
<translation>您的主機名稱太長了。</translation>
</message>
<message>
<location filename="../src/modules/users/UsersPage.cpp" line="343"/>
<source>Your hostname contains invalid characters. Only letters, numbers and dashes are allowed.</source>
<translation>您的主機名稱含有無效的字元。只能使用字母、數字及破折號。</translation>
</message>
<message>
<location filename="../src/modules/users/UsersPage.cpp" line="371"/>
<location filename="../src/modules/users/UsersPage.cpp" line="415"/>
<source>Your passwords do not match!</source>
<translation>密碼不符!</translation>
</message>
<message>
<location filename="../src/modules/users/UsersPage.cpp" line="494"/>
<source>Password is too short</source>
<translation>密碼太短</translation>
</message>
<message>
<location filename="../src/modules/users/UsersPage.cpp" line="513"/>
<source>Password is too long</source>
<translation>密碼太長</translation>
</message>
</context>
<context>
<name>UsersViewStep</name>
<message>
<location filename="../src/modules/users/UsersViewStep.cpp" line="50"/>
<source>Users</source>
<translation>使用者</translation>
</message>
</context>
<context>
<name>WelcomePage</name>
<message>
<location filename="../src/modules/welcome/WelcomePage.ui" line="14"/>
<source>Form</source>
<translation>表單</translation>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.ui" line="75"/>
<source>&amp;Language:</source>
<translation>語言(&amp;L)</translation>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.ui" line="176"/>
<source>&amp;Release notes</source>
<translation>發行註記(&amp;R)</translation>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.ui" line="166"/>
<source>&amp;Known issues</source>
<translation>已知問題(&amp;K)</translation>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.ui" line="156"/>
<source>&amp;Support</source>
<translation>支援(&amp;S)</translation>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.ui" line="146"/>
<source>&amp;About</source>
<translation>關於(&amp;A)</translation>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.cpp" line="60"/>
<source>&lt;h1&gt;Welcome to the %1 installer.&lt;/h1&gt;</source>
<translation>&lt;h1&gt;歡迎使用 %1 安裝程式。&lt;/h1&gt;</translation>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.cpp" line="60"/>
<source>&lt;h1&gt;Welcome to the Calamares installer for %1.&lt;/h1&gt;</source>
<translation>&lt;h1&gt;歡迎使用 %1 的 Calamares 安裝程式。&lt;/h1&gt;</translation>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.cpp" line="73"/>
<source>About %1 installer</source>
<translation>關於 %1 安裝程式</translation>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.cpp" line="75"/>
<source>&lt;h1&gt;%1&lt;/h1&gt;&lt;br/&gt;&lt;strong&gt;%2&lt;br/&gt;for %3&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;Copyright 2014-2017 Teo Mrnjavac &amp;lt;teo@kde.org&amp;gt;&lt;br/&gt;Copyright 2017 Adriaan de Groot &amp;lt;groot@kde.org&amp;gt;&lt;br/&gt;Thanks to: Anke Boersma, Aurélien Gâteau, Kevin Kofler, Lisa Vitolo, Philip Müller, Pier Luigi Fiorini, Rohan Garg and the &lt;a href=&quot;https://www.transifex.com/calamares/calamares/&quot;&gt;Calamares translators team&lt;/a&gt;.&lt;br/&gt;&lt;br/&gt;&lt;a href=&quot;http://calamares.io/&quot;&gt;Calamares&lt;/a&gt; development is sponsored by &lt;br/&gt;&lt;a href=&quot;http://www.blue-systems.com/&quot;&gt;Blue Systems&lt;/a&gt; - Liberating Software.</source>
<translation>&lt;h1&gt;%1&lt;/h1&gt;&lt;br/&gt;&lt;strong&gt;%2&lt;br/&gt;為 %3&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;Copyright 2014-2017 Teo Mrnjavac &amp;lt;teo@kde.org&amp;gt;&lt;br/&gt;Copyright 2017 Adriaan de Groot &amp;lt;groot@kde.org&amp;gt;&lt;br/&gt;感謝Anke Boersma, Aurélien Gâteau, Kevin Kofler, Lisa Vitolo, Philip Müller, Pier Luigi Fiorini, Rohan Garg 與 &lt;a href=&quot;https://www.transifex.com/calamares/calamares/&quot;&gt;Calamares 翻譯團隊&lt;/a&gt;&lt;br/&gt;&lt;br/&gt;&lt;a href=&quot;http://calamares.io/&quot;&gt;Calamares&lt;/a&gt; 開發由 &lt;br/&gt;&lt;a href=&quot;http://www.blue-systems.com/&quot;&gt;Blue Systems&lt;/a&gt; - Liberating Software 贊助。</translation>
</message>
<message>
<location filename="../src/modules/welcome/WelcomePage.cpp" line="201"/>
<source>%1 support</source>
<translation>%1 支援</translation>
</message>
</context>
<context>
<name>WelcomeViewStep</name>
<message>
<location filename="../src/modules/welcome/WelcomeViewStep.cpp" line="51"/>
<source>Welcome</source>
<translation>歡迎</translation>
</message>
</context>
</TS>